Fuel Vaporizer: Alternative Solution for DPF Regeneration
Authors:
- 12 April 2010
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Current emission standards for diesel passenger cars in Europe and the US require the use of diesel particulate filters (DPF). For optimal engine performance the accumulated soot on the filter has to be removed periodically at elevated exhaust gas temperature of 600-650\,DC. Since many driving conditions do not allow such exhaust gas temperature additional measures have to be applied to increase the temperature in the exhaust.Post-injection of diesel fuel in the combustion chamber is the more common solution used to increase the exhaust temperature for particulate filter regeneration. Oil dilution is one of the drawbacks of regeneration by post-injection.The use of a fuel vaporizer is another option to increase the exhaust temperature by introducing fuel in vapor form into the exhaust system. The vaporizer can be located in front of the DOC/DPF either in a close coupled position to the engine or in an underfloor position. The vaporized hydrocarbons (HC) are burnt on the diesel oxidation catalyst (DOC). Energy is released by exothermal chemical reactions and the required regeneration temperature is obtained in front of the DPF.This paper discusses the impact of different exhaust system designs and different fuel vaporizer locations on the performance of such technology. The performance is analyzed relative to uniform temperature distribution and HC-slip. The results of these measurements are used to discuss how a fuel vaporizer can be used to develop an optimized strategy for DPF regeneration in combination with post-injection.Keywords
This publication has 4 references indexed in Scilit:
- Exhaust Fuel Injection System for Efficient DPF RegenerationsATZautotechnology, 2009
- Dual Line Exhaust Design Optimisation to Maximize SCR Catalyst Efficiency thru Improved Ammonia DistributionSAE International Journal of Advances and Current Practices in Mobility, 2009
- Influence of Diesel Post Injection Timing on HC Emissions and Catalytic Oxidation PerformanceSAE International Journal of Advances and Current Practices in Mobility, 2006
- Diesel Vaporizer: An Innovative Technology for Reducing Complexity and Costs Associated with DPF RegenerationSAE International Journal of Advances and Current Practices in Mobility, 2005