Exploring Carbide-Free Bainitic Structures for Hot Dip Galvanizing Products
Authors:
- Francisca Garcia CaballeroFrancisca Garcia Caballero
- Sébastien AllainSASébastien Allain
- Juan-David Puerta-VelásquezJPJuan-David Puerta-Velásquez
- Carlos Garcia-MateoCarlos Garcia-Mateo
- 1 January 2013
- journal article
- research article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 53 (7) , 1253-1259
Abstract
Recently, advanced high strength steels for automotive applications were designed to achieve a carbide-\ud free bainitic microstructure after conventional thermo-mechanical processing and a continuous\ud annealing treatment. The microstructure obtained consists of ferrite laths interwoven with thin films of\ud untransformed retained austenite. The sufficiently tough matrix and the control of the heterogeneity in the\ud microstructure allowed an optimum combination of strength, ductility, and formability to be achieved.\ud However, this work probed that even using a devoted theoretical alloying, carbide-free bainitic steels are\ud hardly compatible with a conventional hot dip galvanizing annealing process, without any consideration\ud about Zn coatability and adherence. The hardenability of the designed alloys was insufficient in some\ud cases and the amount of austenite retained in the microstructure was too low or/and mechanically too\ud unstable for high ductility. As a consequence, the obtained mechanical properties were comparable to\ud those in high-Si dual phase steels without a beneficial transformation induced plasticity effectsupport of the\ud Research Fund for Coal and Steel (contract RFSR-CT-2008-\ud 00021) and the Spanish Ministry of Science and Innovation\ud (contracts MAT2010-15330 and IPT-2012-0320-420000)\ud for funding this researchPeer revieweKeywords
This publication has 19 references indexed in Scilit:
- High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationshipsCurrent Opinion in Solid State and Materials Science, 2011
- Microstructure – Properties Relationships in Carbide-free Bainitic SteelsISIJ International, 2011
- Theoretical design and advanced microstructure in super high strength steelsMaterials & Design (1980-2015), 2009
- Effects of Morphology and Stability of Retained Austenite on the Ductility of TRIP-aided Bainitic SteelsISIJ International, 2008
- Design of Advanced Bainitic Steels by Optimisation of TTT Diagrams and T0 CurvesISIJ International, 2006
- Nucleation theory for high-carbon bainiteMaterials Science and Engineering: A, 2004
- Transformation-induced plasticity for high strength formable steelsCurrent Opinion in Solid State and Materials Science, 2004
- Retained Austenite Characteristics and Stretch-flangeability of High-strength Low-alloy TRIP Type Bainitic Sheet Steels.ISIJ International, 2002
- KINETICS OF THE SIMULTANEOUS DECOMPOSITION OF AUSTENITE INTO SEVERAL TRANSFORMATION PRODUCTSActa Materialia, 1997
- A rationalisation of shear transformations in steelsActa Metallurgica, 1981