Aluminum Leaching from Calcined Coal Waste Using Hydrochloric Acid Solution
Authors:
- 1 November 2012
- journal article
- research article
- Published by Taylor & Francis in Mineral Processing and Extractive Metallurgy Review
- Vol. 33 (6) , 391-403
Abstract
Coal waste is the largest industrial solid waste generated from coal preparation plants during the processing and cleaning of coal for electric power generation. Aluminum oxide (Al2O3, 16–36%), silicon dioxide (SiO2, 45–58%), and carbon (4–25%) account for more than 90% of the coal waste. In this paper the results of aluminum leaching from calcined coal waste are reported. Techniques including XRD, SEM, and FTIR were used to characterize the coal waste before and after calcination. Three additives were evaluated during the calcination process to improve the extraction of Al2O3 by hydrochloric acid dissolution. The results from the leaching experiments show that coal waste is activated after calcination at a temperature between 650°C and 750°C. With addition of sodium fluoride effective aluminum dissolution of 90% was achieved under certain conditions. The extent of leaching was found to be 20% higher than that achieved without sodium fluoride addition.Keywords
This publication has 3 references indexed in Scilit:
- Research on cementitious behavior and mechanism of pozzolanic cement with coal gangueCement and Concrete Research, 2006
- Thermal treatment of kaolin: the effect of mineralogy on the pozzolanic activityApplied Clay Science, 2001
- FT-IR Partial Least-Squares Analysis of Tubular Halloysite in Kaolin Samples from the Mount Hope Kaolin DepositClay Minerals, 1993