Numerical Simulation of Cavitation Performance in Engine Cooling Water Pump Based on a Corrected Cavitation Model
Open Access
Abstract
To analyze the internal flow of the engine cooling water pump (ECWP) under thermodynamic effect, Zwart cavitation model based on the Rayleigh-Plesset equation is corrected, and NACA0015 hydrofoil was selected to verify the corrected model. The cavitation performances of ECWP with different temperatures were numerically simulated based on a corrected cavitation model. Research results show that simulation values of pressure distribution coefficient in hydrofoil surface at 70 °C are in closest agreement with experimental values when the evaporation and condensation coefficients are 10 and 0.002, respectively. With the decrease of absolute pressure in pump inlet, bubbles firstly occurred at the blade inlet side near the suction surface and then gradually extended to the pressure surface, finally clogged the impeller passage. Compared to the inlet section, the cavitation degree is much more serious close to the trailing edge. With the temperature increases, the cavitation in ECWP occurs in advance and rapidly, and the temperature plays an important role in promoting cavitation process in ECWP. Based on the unsteady simulation of ECWP, the influence of cavitation on the performance characteristics is studied. The results provide a theoretical reference for the prediction and optimization of the cavitation performance in ECWP.Keywords
Funding Information
- National Natural Science Foundation of China (No.51679111, No.51409127, No.51579118)
- National Key R&D Program Project (No.2017YFC0403703)
- Key R&D Program Project in Jiangsu Province (BE2016319, BE2017126)
- Natural Science Foundation of Jiangsu Province (No.BK20161472, No.BK20160521)
- Science and Technology Support Program of Changzhou (No.CE20162004)
- Key R&D Program Project of Zhenjiang (No.SH2017049)
- Scientific Research Start Foundation Project of Jiangsu University (No.13JDG105)
This publication has 18 references indexed in Scilit:
- Numerical Prediction and Performance Experiment in an Engine Cooling Water Pump with Different Blade Outlet WidthsMathematical Problems in Engineering, 2017
- Large Eddy Simulation and theoretical investigations of the transient cavitating vortical flow structure around a NACA66 hydrofoilInternational Journal of Multiphase Flow, 2015
- Experimental Study on Hydrodynamic Characteristics of Cavitating Flows around Hydrofoil under Different Water TemperaturesJournal of Mechanical Engineering, 2014
- Hydrofoil Cavitation Under Strong Thermodynamic EffectJournal of Fluids Engineering, 2008
- Analysis of Thermal Effects in a Cavitating Inducer Using Rayleigh EquationJournal of Fluids Engineering, 2007
- Thermodynamic Effect on a Cavitating Inducer in Liquid NitrogenJournal of Fluids Engineering, 2006
- Thermal Cavitation Experiments on a NACA 0015 HydrofoilJournal of Fluids Engineering, 2005
- An Experimental Investigation of Thermal Effects in a Cavitating InducerJournal of Fluids Engineering, 2004
- Estimation of thermal effects in cavitation of thermosensible liquidsInternational Journal of Heat and Mass Transfer, 1999
- Bubble Dynamics and CavitationAnnual Review of Fluid Mechanics, 1977