Quantum Dot Laser Diodes emitting 1.57∼1.67μm at Room Temperature Grown by Block Copolymer Lithography and Selective Area MOCVD
Authors:
- 1 September 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Abstract
Semiconductor Laser diodes (LD) employing quantum dot (QD) active regions have attracted attention due to the theoretical predictions: low threshold current density and low temperature sensitivity originated from the delta-function-like density of states and small active volume [1]. However, while high performance devices have been demonstrated, the realization of all the predicted advantages has remained challenging. Self-assembled QDs grown by Stranski-Krastanov (SK) growth mode can suffer from an inhomogeneity in the QD size distribution, as well as an inherent wetting layer [2]. In particular, the InAs QD formation on InP substrates for the emission wavelength near the telecom C-band (1.55μm) remains quite challenging, compared to that emitting near telecom O-band (1.3 μm) grown on GaAs substrate because of the smaller driving force for the nucleation of InAs QDs, stemming from the smaller lattice mismatch on InP [3]. On the other hand, nanopatterning and selective metalorganic chemical vapor deposition (MOCVD) growth offer a more controllable pathway for QD formation, allowing the QD size to be decoupled from the strain state of the material. This process results in the formation of dense arrays of wetting-layer-free QDs, although the challenges stemming from surface state formation and efficient carrier injection into the QDs have remained problematic issues [4]. Here, we report the first demonstration of laser diodes operating at RT, employing an In 0.8 Ga 0.2 As QD active region formed by nanopatterning and selective growth on InP substrate. The QDs are formed in close proximity to an In 0.53 Ga 0.47 As carrier collecting QW, which are schematically represented in Fig. 1 (a). The LDs employ an active region consisting of a dense single-layer array of compressively-strained In 0.8 Ga 0.2 As QDs (Density ~ 5-6× 10 10 cm -2 ), as shown in Fig. 1. (b).Keywords
This publication has 5 references indexed in Scilit:
- Selective growth of strained (In)GaAs quantum dots on GaAs substrates employing diblock copolymer lithography nanopatterningJournal of Crystal Growth, 2017
- High gain 1.55 μm diode lasers based on InAs quantum dot like active regionsApplied Physics Letters, 2011
- Experimental investigation of the effect of wetting-layer states on the gain–current characteristic of quantum-dot lasersApplied Physics Letters, 2002
- Optical characteristics of 1.24-μm InAs quantum-dot laser diodesIEEE Photonics Technology Letters, 1999
- Gain and the threshold of three-dimensional quantum-box lasersIEEE Journal of Quantum Electronics, 1986