Investigation on the Dielectric Properties of 0–3 Lead Zirconate Titanate-Geopolymer Composites
- 1 January 2013
- journal article
- research article
- Published by Taylor & Francis in Ferroelectrics
- Vol. 451 (1) , 84-89
Abstract
Lead zirconate titanate (PZT)-fly ash geopolymer pastes composites of 0–3 connectivity were fabricated using 30–50% by volume. The mineralogical compositions of fly ash geopolymer materials were investigated using X-ray diffraction (XRD). The 10 mol sodium hydroxide solution and sodium silicate solution at a sodium silicate-to-sodium hydroxide ratio of 0.67 were used to prepare geopolymer pastes. The pastes were cured at 60°C for 2 days. The results showed that the dielectric constant of PZT-fly ash geopolymer pastes composites decreased with increasing PZT content at 1 KHz. The dielectric properties of PZT-fly ash geopolymer pastes composites were also found to depend on the frequency.Keywords
This publication has 19 references indexed in Scilit:
- Compressive strength and drying shrinkage of fly ash-bottom ash-silica fume multi-blended cement mortarsMaterials & Design (1980-2015), 2012
- Compressive strength and microstructure of carbon nanotubes–fly ash cement compositesMaterials Science and Engineering: A, 2010
- Comparative study on the characteristics of fly ash and bottom ash geopolymersWaste Management, 2009
- Dielectric and piezoelectric properties of PZT–cement compositesCurrent Applied Physics, 2007
- Ferroelastic domain switching in lead zirconate titanate measured by in situ neutron diffractionMechanics of Materials, 2007
- Workability and strength of coarse high calcium fly ash geopolymerCement and Concrete Composites, 2007
- Properties of concrete made with alkali-activated fly ash lightweight aggregate (AFLA)Cement and Concrete Composites, 2007
- Piezoresistive Cement-Based Materials for Strain SensingJournal of Intelligent Material Systems and Structures, 2002
- Cement‐Based 0‐3 Piezoelectric CompositesJournal of the American Ceramic Society, 2002
- Stress induced domain switching of PZT in compression testsMaterials Science and Engineering: A, 2001