Study on the key role of hierarchical microstructure for strength and plasticity in a lath martensitic steel
Authors:
Open Access
- 1 March 2018
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 324 (1) , 012043
Abstract
In this paper, the effect of substructure of lath martensite on the mechanical properties was discussed in detail. Results indicated that prior austenite grain, packet and block increase with the increasing of quenching temperature. A good linear relationship exists between the packet, block and prior austenite, which reveal that the size of packet, block depends on prior austenite grain. However, lath is increased with not determined by prior austenite grain. Based on the EBSD analysis, the large ratio of the low angle orientation boundaries determines the better plasticity is obtained in coarse grain. Therefore, the refining of martensite lath or the increase of the low angle orientation plays an important role on improving the plasticity in lath martensite steel.Keywords
This publication has 10 references indexed in Scilit:
- The important role of martensite laths to fracture toughness for the ductile fracture controlled by the strain in EA4T axle steelMaterials Science and Engineering: A, 2017
- On the role of interlath retained austenite in the deformation of lath martensiteModelling and Simulation in Materials Science and Engineering, 2014
- Effect of tensile deformation of austenite on the morphology and strength of lath martensiteMetals and Materials International, 2012
- Effect of Substructure on Toughness of Lath Martensite/Bainite Mixed Structure in Low-Carbon SteelsJournal of Iron and Steel Research International, 2010
- The morphology and crystallography of lath martensite in Fe-C alloysActa Materialia, 2003
- Martensite in steel: strength and structureMaterials Science and Engineering: A, 1999
- Effect of microstructure on strength and toughness of heat-treated low alloy structural steelsMetallurgical Transactions A, 1986
- The effect of structure on the deformation of as-quenched and tempered martensite in an Fe-0.2 pct C alloyMetallurgical Transactions A, 1976
- Effect of transformation substructure on the strength and toughness of Fe−Mn alloysMetallurgical Transactions, 1970
- The Fracture of a Low Carbon Tempered MartensiteTransactions of the Japan Institute of Metals, 1970