Application of polarized light microscopy on microstructural characterization of semisolid slurry
Authors:
- 4 July 2018
- journal article
- research article
- Published by Wiley in Rare Metals
- Vol. 42 (10) , 3545-3552
Abstract
In this paper, two ways of microstructural characterization, optical microscopy (OM) and polarized light microscopy (PLM), were both employed to describe the microstructure of semisolid slurry prepared by swirling enthalpy equilibration device (SEED). The results show that PLM is more reliable and accurate than OM to describe the special morphology feature of semisolid slurry made by SEED process. Meanwhile, the effects of pouring temperature and mass of molten liquid on the primary α‐Al particle size and morphology were also investigated using PLM. The quantitative metallographic results measured from PLM demonstrate that the grain size and morphology and their distribution are significantly affected by both pouring temperature and the mass of molten liquid. The grain size poured with 2.7 kg liquid decreases from 659 to 186 μm, and grain morphology transforms from dendrite to globular structure with pouring temperature reducing from 690 to 630 °C. The decreasing pouring temperature also promotes the distribution of spherical structure on the cross section. Meanwhile, the mass of molten liquid decreasing from 2.7 to 2.3 kg can decrease the grain size by maximum of 44% at high pouring temperature.Keywords
Funding Information
- the national key Research and Development Program of China (2016YFB0301003)
This publication has 27 references indexed in Scilit:
- Formation of spheroidal microstructure in semi‐solid state and thixoforming of 7075 high strength aluminum alloyRare Metals, 2013
- Deformation Behavior of Semisolid A356 Alloy Prepared by Low Temperature PouringMaterials and Manufacturing Processes, 2010
- Microstructure evolution of rheo-cast A356 aluminium alloy in consideration of different cooling conditions by means of the cooling channel processJournal of Materials Processing Technology, 2010
- Microstructural coarsening of semi-solid aluminium alloysMaterials Science and Engineering: A, 2008
- The Determination of Semi-Solid Processing Ability Using a Novel Rheo-Characterizer ApparatusSolid State Phenomena, 2008
- The SEED Technology for Semi-Solid Processing of Aluminum Alloys: A Metallurgical and Process OverviewSolid State Phenomena, 2006
- A Heat Transfer Model for the Production of Semi-Solid Billets with the SEED ProcessMaterials Science Forum, 2006
- The effect of chemical grain refinement and low superheat pouring on the structure of NRC castings of aluminium alloy Al–7Si–0.4MgMaterials Science and Engineering: A, 2006
- Effect of pouring temperature on semi-solid slurry of A356 Al alloy prepared by weak electromagnetic stirringTransactions of Nonferrous Metals Society of China, 2006
- Modelling the semisolid processing of metallic alloysProgress in Materials Science, 2005