A Study on Incipient Damage Monitoring in Rolling Contact Fatigue Process Using Acoustic Emission
- 22 September 2008
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 51 (5) , 543-551
Abstract
Acoustic emissions (AE) technique was applied to rolling contact fatigue tests of two radially loaded rollers running under constant load and velocity to detect the incipient damage and damage location. Signals detected from contacts were processed using signal conditioning and enhancement techniques by an AE source locator to bring out the difference between the signals from the sound and damaged rollers. It was found that AE hit count pulse observations by the AE source locator can provide an indication of the damage at its initial stage. The conventional AE parameters and the AE signal features were studied and correlated with the AE source locator counts. The results demonstrated the successful use of the combination of the AE monitoring and the AE source locator as a new technique for detecting the incipient damage and forecasting the position of the damage in the roller, and this technique could allow the user to monitor the rate of deterioration of the rolling elements.Keywords
This publication has 12 references indexed in Scilit:
- A comparative experimental study on the use of acoustic emission and vibration analysis for bearing defect identification and estimation of defect sizeMechanical Systems and Signal Processing, 2006
- Identification of the acoustic emission source during a comparative study on diagnosis of a spur gearboxTribology International, 2005
- Application of acoustic emission to seeded gear fault detectionNDT & E International, 2005
- ROLLING ELEMENT BEARING DIAGNOSTICS IN RUN-TO-FAILURE LIFETIME TESTINGMechanical Systems and Signal Processing, 2001
- Acoustic emission of rolling bearings lubricated with contaminated greaseTribology International, 2000
- Application of acoustic emission technique for the detection of defects in rolling element bearingsTribology International, 2000
- Detecting Gear Tooth Breakage Using Acoustic Emission: a Feasibility and Sensor Placement StudyJournal of Mechanical Design, 1999
- A review of vibration and acoustic measurement methods for the detection of defects in rolling element bearingsTribology International, 1999
- Diagnosis of Rolling Bearing by Measuring Time Interval of AE GenerationJournal of Tribology, 1999
- BEARING CONDITION DIAGNOSTICS VIA VIBRATION AND ACOUSTIC EMISSION MEASUREMENTSMechanical Systems and Signal Processing, 1997