Study on the Rheological Properties and Microstructural Evolution Mechanism of Multicomponent Solid Waste Cementitious Slurry
Open Access
Abstract
To enhance the rheological properties and engineering applicability of fully solid waste filling slurry, this study uses iron tailings sand as aggregate and slag, steel slag, and desulfurization ash as cementing materials. Through a central composite design experiment, the synergistic regulatory effects of steel slag (10~30%) and desulfurization ash (10~30%) on the slurry’s rheological and strength properties were systematically investigated. The yield stress and plastic viscosity of the slurry were quantified based on the Bingham fluid model, using expansion tests and L-tube models, while isothermal calorimetry analysis and microscopic image processing revealed the underlying micro-mechanisms. The results show that when both steel slag and desulfurization ash contents are 20%, the cured specimen prepared from the slurry achieves an optimal 28-day uniaxial compressive strength of 5.90 MPa at 28 days, with yield stress and plastic viscosity of 146.71 Pa and 3.04 Pa·s, respectively. Micro-mechanistic analysis revealed that desulfurization ash effectively reduced the yield stress by up to 38% (from 196.04 Pa to 90.01 Pa) and increased the fractal dimension of flocculated structures to 1.906, thereby optimizing initial flowability. Conversely, steel slag increased the yield stress but decreased plastic viscosity, enhancing structural stability, and regulating the later hydration process. The loop tests confirmed the good transport performance and engineering adaptability of the optimized mix, achieving a cost reduction of up to 65% compared to cement-based systems.Keywords
Funding Information
- Key Research Projects of Liaoning Provincial Education Department (JYTZD2023077)
This publication has 48 references indexed in Scilit:
- A holistic determination of optimal coagulant dosage by exploring the dynamics of particle size distribution, floc structure, and electrochemistryChemical Engineering Journal, 2025
- Study on the mechanical properties and failure mechanism of polypropylene fiber–rubber-modified solid waste-based backfillJournal of Materials Science, 2025
- Chemical reaction of solid particle aggregates in quiescent fluidsChemical Engineering Journal, 2024
- Enhancing hydration of steel slag-based composite cementitious material: Synergistic effect of triisopropanolamine (TIPA) and sulfite/sulfateCement and Concrete Research, 2024
- Application of micro-crystalline cellulose as additive in Portland cement-based and alkali activated slag-fly ash mortar: Comparison of compressive strength, hydration and shrinkageConstruction and Building Materials, 2023
- Fractional modelling of salinity/temperature-dependent shear rheological behavior including stress overshoot for bentonite clay suspensionsApplied Mathematical Modelling, 2023
- Hydration and mechanical properties of cement-steel slag system incorporating different activatorsConstruction and Building Materials, 2022
- Mortar’s rheological property and workability investigation based on morphology impact factor for graded sand particlesConstruction and Building Materials, 2022
- RSM-based modeling and optimization of self-consolidating mortar to predict acceptable ranges of rheological propertiesConstruction and Building Materials, 2018
- Influence of nanoparticles on fluidity and mechanical properties of cement mortarConstruction and Building Materials, 2015