Effect of Surface Velocity Directions on Elastohydrodynamic Film Shape
- 1 March 2013
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 56 (2) , 301-309
Abstract
This article is focused on the effects of the angle between lubricant entrainment velocity and sliding velocity on elastohydrodynamic film thickness distribution. Thin-film colorimetric interferometry was used to evaluate the film thickness distribution in smooth glass–steel contacts to provide basic data on the effects of the slide–roll ratio and the direction of sliding with respect to entrainment velocity. It was observed that as the sliding perpendicular to the entrainment velocity increased, the overall film thickness was reduced and asymmetry of the film profile with respect to the direction of the entrainment velocity increased. The asymmetry of the film profile with respect to the direction of the entrainment velocity increased with the entrainment speed or the overall film thickness. When the speed of the glass disk was larger than that of the steel ball, a dimple was formed even if there was a difference in direction between the entrainment and sliding velocities. A part of the dimple was exhausted from the elastohydrodynamic lubrication (EHL) conjunction as the angle between the entrainment and sliding velocities approached 90°.Keywords
This publication has 29 references indexed in Scilit:
- EHL Circular Contact Film Thickness Correction Factor for Shear-Thinning FluidsJournal of Tribology, 2008
- Shear thinning correction for rolling/sliding elastohydrodynamic film thicknessProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2005
- Experimental Evaluation of EHD Film Shape and Its Comparison With Numerical SolutionJournal of Tribology, 2000
- Prediction of oil-film thickness and shape in elliptical point contacts under combined rolling and sliding motionProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2000
- Experimental Study of Central and Minimum Elastohydrodynamic Film Thickness by Colorimetric Interferometry TechniqueTribology Transactions, 2000
- Elastohydrodynamic film thickness for shear-thinning lubricantsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1998
- Abnormal Phenomena Appearing in EHL ContactsJournal of Tribology, 1996
- Effects of Elastic Moduli of Contact Surfaces in Elastohydrodynamic LubricationJournal of Tribology, 1992
- Oil Film Thickness and Pressure Distribution in Elastohydrodynamic Point ContactsJournal of Mechanical Engineering Science, 1982
- Hydrodynamic Friction in Elliptical and Circular Point ContactsJournal of Mechanical Engineering Science, 1974