Fracture simulation of nacre-like structures composed of bricks bonded with cohesive model
Authors:
Open Access
- 1 January 2026
- journal article
- Published by Japan Society of Mechanical Engineers in Mechanical Engineering Journal
- Vol. 13 (2) , 25-00379
Abstract
In this study, we focused on the high fracture toughness of nacre, which has a microscopic structure consisting of calcium carbonate lamellae and protein stacks. We performed deformation and fracture analysis on a compact tension (CT) specimen, where a brick-like structure, with lamellae modeled as bricks and proteins as a cohesive model, was placed at the tip of an artificial crack. First, a CT specimen with a single brick-like structure was printed using an FDM 3D printer and subjected to tensile loading. Next, a finite element (FE) analysis was performed on an FE model with the same shape. As a result, it was confirmed that the nonlinear deformation behavior and fracture process obtained by the FE analysis were in good agreement with the test results. Then, using the verified FE model, finite element analysis was performed on brick-like structured CT specimens with different brick aspect ratios. The results showed that the maximum load and the maximum displacement to failure increased as the brick aspect became more elongated along the tensile loading direction. This was attributed to the resistance as the brick was pulled out of the matrix. Consequently, a finite element analysis was performed on a CT specimen with a multilayered brick-like structure, where a certain area around the tip of the artificial crack was filled with a brick-cohesive model. The results confirmed that, similar to the single brick-like structure, the pull-out resistance of the brick and the zigzag crack propagation path were effective in improving the fracture resistance. However, when the brick aspect exceeded a certain value, the brick itself cracked, causing the crack to propagate linearly and reducing the maximum load.Keywords
This publication has 15 references indexed in Scilit:
- Nacre toughening due to cooperative plastic deformation of stacks of co-oriented aragonite plateletsCommunications Materials, 2020
- On the fracture mechanisms of nacre: Effects of structural orientationJournal of Biomechanics, 2019
- Designing nacre-like materials for simultaneous stiffness, strength and toughness: Optimum materials, composition, microstructure and sizeJournal of the Mechanics and Physics of Solids, 2014
- Crack tortuousity in the nacreous layer – Topological dependence and biomimetic design guidelineInternational Journal of Solids and Structures, 2014
- The toughening mechanism of nacre and structural materials inspired by nacreScience and Technology of Advanced Materials, 2011
- Interfacial shear strength in abalone nacreJournal of the Mechanical Behavior of Biomedical Materials, 2009
- On the mechanics of mother-of-pearl: A key feature in the material hierarchical structureJournal of the Mechanics and Physics of Solids, 2007
- Growth and structure in abalone shellMaterials Science and Engineering: A, 2005
- The mechanical design of nacreProceedings of the Royal Society of London. B. Biological Sciences, 1988
- Mechanical properties of mother of pearl in tensionProceedings of the Royal Society of London. B. Biological Sciences, 1977