Effect of Particle Size Distribution on Laser Powder Bed Fusion Manufacturability of Copper
Open Access
- 21 April 2021
- journal article
- other
- Published by Springer Nature in BHM Berg- und Hüttenmännische Monatshefte
- Vol. 166 (5) , 256-262
Abstract
One of the major benefits of the Laser Powder Bed Fusion (LPBF) technology is the possibility of fabrication of complex geometries and features in only one-step of production. In the case of heat exchangers in particular, this is very convenient for the fabrication of conformal cooling channels which can improve the performance of the heat transfer capability. Yet, obtaining dense copper parts printed via LPBF presents two major problems: the high reflectivity of 1 μm (the wavelength of commonly used laser sources) and the high thermal conductivity of copper that limits the maximum local temperature that can be attained. This leads to the formation of porous parts.In this contribution, the influence of the particle size distribution of the powder on the physical and mechanical properties of parts produced via LPBF is studied. Three copper powders lots with different particle size distributions are used in this study. The effect on densification from two laser scan parameters (scan speed and hatching distance) and the influence of contours scans on the lateral surface roughness is reported. Subsequently, samples manufactured with the optimal process parameters are tested for thermal and mechanical properties evaluation.Keywords
Funding Information
- Università degli Studi di Padova
This publication has 11 references indexed in Scilit:
- Influence of Carbon Nanoparticle Addition (and Impurities) on Selective Laser Melting of Pure CopperMaterials, 2019
- Influence of selective laser melting process parameters on texture evolution in pure copperJournal of Materials Processing Technology, 2019
- Limits and solutions in processing pure Cu via selective laser melting using a high-power single-mode fiber laserThe International Journal of Advanced Manufacturing Technology, 2019
- Powders for powder bed fusion: a reviewProgress in Additive Manufacturing, 2019
- Powder bed fusion processes2017
- Applicability of copper alloys for DEMO high heat flux componentsPhysica Scripta, 2015
- Review of selective laser melting: Materials and applicationsApplied Physics Reviews, 2015
- Effect of porosity on the thermal conductivity of copper processed by powder metallurgyJournal of Physics and Chemistry of Solids, 2012
- Selective laser melting (SLM) of gold (Au)Rapid Prototyping Journal, 2012
- The role of particle size on the laser sintering of iron powderMetallurgical and Materials Transactions B, 2004