Mechanical Properties of Uncured Thermoset Tow Prepreg: Experiment and Finite Element Analysis
Preprint
- 27 June 2023
- preprint
- Published by MDPI AG in Preprints.org
Abstract
In this paper, the tensile behavior of unidirectional carbon/epoxy prepreg is experimentally analyzed at varying loads and temperatures, focusing on the considerable nonlinearity at the beginning of the stress-strain curve. The high viscosity of this material presented difficulties in securely holding specimens during tensile testing. As a result, modifications were made to the conventional gripping method to enable the acquisition of reliable test data. Additionally, a longer gauge length was chosen to minimize the impact of slippage on the elastic modulus measurement. To support the experiment, a micromechanical model of a prepreg tow with fiber waviness is proposed. An RVE model of periodically distributed unidirectional waved cylindrical fibers embedded within the matrix is developed to predict the effective material stiffness parameters. Numerical results are presented for different amplitude-to-wavelength ratios which indicate the fiber waviness reduces the tensile modulus of the composite. The simulation results are in good agreement with the uniaxial tensile test of the prepreg tow.Keywords
All Related Versions
- Version 1, 2023-06-27, Preprints
- Published version: Journal of Composites Science, 7 (8), 312.
This publication has 30 references indexed in Scilit:
- The influence of fiber alignment, structure and concentration on mechanical behavior of carbon nanofiber/epoxy composites: Experimental and numerical studyPolymer Composites, 2020
- Characterization of fibre alignment in as-received aerospace grade unidirectional prepregComposites Part A: Applied Science and Manufacturing, 2018
- Effect of micromechanical parameters of composites with wavy fibers on their effective response under large deformationsAdvances in Engineering Software, 2018
- Development of an ABAQUS plugin tool for periodic RVE homogenisationEngineering with Computers, 2018
- Tensile behaviour of uncured sheet moulding compounds: Rheology and flow-induced microstructuresComposites Part A: Applied Science and Manufacturing, 2017
- Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials designComposites Part A: Applied Science and Manufacturing, 2016
- Characterization of temperature-dependent tensile and flexural rigidities of a cross-ply thermoplastic lamina with implementation into a forming modelInternational Journal of Material Forming, 2016
- Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structuresComposites Part A: Applied Science and Manufacturing, 2008
- Sources of variability in uncured aerospace grade unidirectional carbon fibre epoxy preimpregnateComposites Part A: Applied Science and Manufacturing, 2007
- Measurement of small angle fiber misalignments in continuous fiber compositesComposites Science and Technology, 1987