Experimental Study on Application of Tuned Mass Dampers for Chatter in Turning of a Thin-Walled Cylinder
Open Access
- 17 December 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (24) , 12070
Abstract
Chatter is more likely to occur during the turning process of a thin-walled cylindrical workpiece owing to the low rigidity of such workpieces. Chatter causes intensive vibration, deterioration of the surface finish accuracy, tool damage, and tool wear. Tuned mass dampers (TMD) are usually applied as a passive damping technique to induce a large damping effect using a small mass. This study experimentally investigated the effect of the mounting arrangement and tuning parameters of the TMDs on the production of chatter during the turning process of a thin-walled cylinder, wherein multiple TMDs with extremely small mass ratios were attached to the rotating workpiece. The results of the cutting tests performed by varying the circumferential and axial mounting positions of the TMDs exhibited different characteristics of the chatter suppression effect. Conclusively, the TMDs could suppress the chatter generated by the vibration mode with circumferential nodes if they were mounted on the workpiece to avoid the coincidence of the circumferential arrangement with the pitch of the vibration nodes, regardless of the extremely small mass of the TMDs.Keywords
This publication has 32 references indexed in Scilit:
- Coupled interaction of dynamic responses of tool and workpiece in thin wall millingJournal of Materials Processing Technology, 2013
- Countermeasure against chatter in end milling operations using multiple dynamic absorbersJournal of Sound and Vibration, 2013
- A novel approach to fixture design on suppressing machining vibration of flexible workpieceInternational Journal of Machine Tools and Manufacture, 2012
- Chatter in machining processes: A reviewInternational Journal of Machine Tools and Manufacture, 2011
- Simulation-Based Stability Analysis of a Thin-Walled Cylinder During Turning with Improvements Using an Adaptronic Turning ChiselArchive of Mechanical Engineering, 2011
- Optimization of multiple tuned mass dampers to suppress machine tool chatterInternational Journal of Machine Tools and Manufacture, 2010
- Design and implementation of nonlinear TMD for chatter suppression: An application in turning processesInternational Journal of Machine Tools and Manufacture, 2010
- Vibration absorbers for chatter suppression: A new analytical tuning methodologyJournal of Sound and Vibration, 2007
- A study on the chatter characteristics of the thin wall cylindrical workpieceInternational Journal of Machine Tools and Manufacture, 1994
- Effect of a Variable Stiffness-Type Dynamic Damper on Machine Tools with Long Overhung RamBulletin of JSME, 1976