Unified Yield Criterion for Masonry and Concrete in Multiaxial Stress States
Authors:
- 1 February 2005
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 17 (1) , 54-62
Abstract
In this paper, failure test results of brick masonry and concrete under biaxial stress state, and of concrete under triaxial stress state, are analyzed. In particular, in the biaxial compression stress state masonry is found to behave as an isotropic material. The pertinent failure interaction curve in terms of principal stress components can be expressed by an ellipse or a parabola. Because masonry can be conceived as a conglomerate material, as a concrete, formed by coarse aggregates (bricks) and cement paste (mortar joints), a generalized failure criterion in the form of an elliptical curve valid both for masonry and concrete in compression biaxial state is provided. In the case of the triaxial compression stress state, from an analysis performed on the test results available for concrete, a prediction of the hydrostatic compressive strength is derived, and a possible form of the limit surface in the principal stress space is hypothesized.Keywords
This publication has 7 references indexed in Scilit:
- Complete Triaxial Stress-Strain Curves of High-Strength ConcreteJournal of Materials in Civil Engineering, 2001
- Stress-Strain Characteristics of Brick Masonry under Cyclic Biaxial CompressionJournal of Structural Engineering, 2000
- Biaxial Compression Behavior of Concrete under Repeated LoadingJournal of Materials in Civil Engineering, 1999
- Influence of Concrete Tensile Ductility on Compressive Strength of Confined ColumnsJournal of Materials in Civil Engineering, 1994
- Cyclic Behavior of Brick Masonry under Biaxial CompressionJournal of Structural Engineering, 1991
- THE BIAXIAL COMPRESSIVE STRENGTH OF BRICK MASONRY.Proceedings of the Institution of Civil Engineers, 1981
- Fracture and Stress-Strain Relationship of Concrete under Triaxial CompressionJournal of the Structural Division, 1974