Preliminary Characterisation of an Italian Soft Rock with a Block-in-Matrix Fabric
Open Access
- 1 February 2022
- journal article
- research article
- Published by MDPI AG in Geosciences
- Vol. 12 (2) , 70
Abstract
Mélanges are heterogeneous geological deposits and represent the most widespread bimrock (block-in-matrix) formations. This paper presents the efforts undertaken to characterise an Italian mélange composed of a clayey-marly matrix enclosing strong calcareous blocks. Due to its low uniaxial compressive strength, this geomaterial can be classified as a soft rock. The weak nature of the marly matrix and its water sensitivity, as well as the presence of rock inclusions, made the collection and preparation of intact specimens extremely complex and time-consuming operations. The difficulties encountered during these phases are described in detail; the various non-conventional procedures considered and developed to overcome these problems are also presented. The potential of the solutions proposed lies in the fact that they can be conveniently applied to other soft rocks with a block-in-matrix internal arrangement, such as the Italian mélange. To characterise the Italian mélange, point load and uniaxial compressive tests were carried out. From the results of these tests, a conversion factor equal to 14 is proposed to correct the point load strength index in order to estimate the uniaxial compressive strength of soft rocks, such as the mélange under study. Moreover, to estimate local strains and the deformability of the geomaterial, the non-destructive digital image correlation technique was applied.Keywords
This publication has 38 references indexed in Scilit:
- Experimental Investigations into the Mechanical Behaviour of the Breccias Around the Proposed Gibraltar Strait TunnelRock Mechanics and Rock Engineering, 2013
- Correlation Between Point Load Index and Uniaxial Compressive Strength for Different Rock TypesRock Mechanics and Rock Engineering, 2011
- Mélanges and mélange-forming processes: a historical overview and new conceptsInternational Geology Review, 2010
- Degradation of marls; two case studies from the Iberian PeninsulaGeological Society, London, Engineering Geology Special Publications, 2010
- The effect of length to diameter ratio of test specimens on the uniaxial compressive strength of rockBulletin of Engineering Geology and the Environment, 2009
- The Mechanical Behaviour of Clay Shales and Implications on the Design of TunnelsRock Mechanics and Rock Engineering, 2007
- Volumetric Digital Image Correlation Applied to X‐ray Microtomography Images from Triaxial Compression Tests on Argillaceous RockStrain, 2007
- A constitutive model for soft clayey rocks that includes weathering effectsGéotechnique, 2007
- Tunnelling in tectonic melanges?accommodating the impacts of geomechanical complexities and anisotropic rock mass fabricsBulletin of Engineering Geology and the Environment, 2004
- Aspects of rock strengthBulletin of Engineering Geology and the Environment, 1998