Upgrading Heavy Oil Using Syngas as the Hydrogen Source with Dispersed Catalysts
Authors:
- 9 April 2009
- journal article
- research article
- Published by Taylor & Francis in Petroleum Science and Technology
- Vol. 27 (7) , 712-732
Abstract
Upgrading heavy oil using syngas (CO + H2) as an alternative hydrogen source with a dispersed catalyst was investigated. Finely dispersed catalysts for upgrading were prepared by means of microemulsion, and their performance was investigated in a batch-type autoclave. This process was compared to the traditional pure hydrogen hydro-upgrading process. Feedstock conversion, light-oil yield, coke yield, product distribution, sulfur, nitrogen and viscosity were investigated comprehensively to optimize the process. The addition of finely dispersed catalysts could improve the distribution and performance of cracking products, and inhibit the cracking gas and coke formation. This work shows that residue-syngas coprocessing is promising for heavy oil upgrading.Keywords
This publication has 8 references indexed in Scilit:
- Hydrocracking Marlim vacuum residue with natural limonite. Part 2: experimental cracking in a slurry-type continuous reactorFuel, 2005
- Use of a dispersed iron catalyst for upgrading extra-heavy crude oil using methane as source of hydrogen☆Fuel, 2003
- Iron-Catalyzed Coprocessing of Coals and Vacuum Residues Using Syngas−Water as a Hydrogen SourceEnergy & Fuels, 1998
- Iron sulfate/sulfur-catalyzed liquefaction of Wandoan coal using syngas–water as a hydrogen sourceFuel Processing Technology, 1998
- Use of a Dispersed Molybdenum Catalyst and Mechanistic Studies for Upgrading Extra-Heavy Crude Oil Using Methane as Source of HydrogenEnergy & Fuels, 1998
- Upgrading of extra-heavy crude oil by direct use of methane in the presence of waterFuel, 1995
- High-pressure thermal cracking of n-hexadecane in aromatic solventsIndustrial & Engineering Chemistry Research, 1993
- Thermal cracking of petroleum residuesFuel, 1993