Mapping a bedrock surface under dry alluvium with shallow seismic reflections

Authors:
  • DSDon W. Steeples
    Don W. Steeples
  • MBMichael Brannan
    Michael Brannan

Abstract
Shallow seismic-reflection techniques were used to image the bedrock-alluvial interface, near a chemical evaporation pond in the Texas Panhandle, allowing optimum placement of water-quality monitor wells. The seismic data showed bedrock valleys as shallow as 4 m and accurate to within 1 m horizontally and vertically. The normal-moveout velocity within the near-surface alluvium varies from 225 m/s to 400 m/s. All monitor-well borings near the evaporation pond penetrated unsaturated alluvial material. On most of the data, the wavelet reflected from the bedrock-alluvium interface has a dominant frequency of around 170 Hz. Low-cut filtering at 24 dB/octave below 220 Hz prior to analog-to-digital conversion enhanced the amplitude of the desired bedrock reflection relative to the amplitude of the unwanted ground roll. The final bedrock contour map derived from drilling and seismic-reflection data possesses improved resolution and shows a bedrock valley not interpretable from drill data alone.