Defect monitoring in dissimilar friction stir welding of aluminum alloys using Coupled Eulerian-Lagrangian (CEL) finite element model
- 3 July 2022
- journal article
- research article
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 9 (3) , 931-947
Abstract
This article uses coupled Eulerian–Lagrangian finite element algorithm to conduct a three-dimensional thermomechanical study to capture the shape and characteristics of defect type generated while achieving the dissimilar friction stir welding of aluminium alloys. The volume-of-fluid method is used to model the Eulerian region and predict the localised formation of process defects. Three different tool shapes are utilised to achieve the dissimilar friction stir welding joining between AA 2024-T3 on the advancing side and AA 6061-T6 on the retreating side. Process parameter effects such as rotational tool speed, traverse tool speed and tool tilt angle are also investigated. The finite element model results are validated by comparing with the results of a previous experimental study. The results showed the augmentation of the traverse welding speed from 40 to 80 mm/min is a key factor in causing process imperfections such as void and tunnel defects. The lower tilt angle value of 1° resulted in long tunnel defects when high rotational speeds are applied. Also, the combination of high rotational and low transverse speeds promotes the production of a free-defect friction stir welding joint.Keywords
This publication has 24 references indexed in Scilit:
- A Finite Element Model to Simulate Defect Formation during Friction Stir WeldingMetals, 2017
- Investigation of weld defects in friction-stir welding and fusion welding of aluminium alloysInternational Journal of Mechanical and Materials Engineering, 2015
- Investigations on tunneling and kissing bond defects in FSW joints for dissimilar aluminum alloysJournal of Alloys and Compounds, 2015
- Optimization of Friction Stir Welding of ThermoplasticsProcedia CIRP, 2015
- Thermo-mechanical finite element model of friction stir welding of dissimilar alloysThe International Journal of Advanced Manufacturing Technology, 2014
- Thermography inspection of friction stir weldingAIP Conference Proceedings, 2014
- Radiographic detection of defects in friction stir welding on aluminum alloy AMg5MAIP Conference Proceedings, 2014
- Application of coupled Eulerian-Lagrangian approach in metal forming simulationsScientific Letters of Rzeszow University of Technology - Mechanics, 2012
- Three defect types in friction stir welding of aluminum die casting alloyMaterials Science and Engineering: A, 2006
- Contact in a multi-material Eulerian finite element formulationComputer Methods in Applied Mechanics and Engineering, 2004