Optimum design of low time-bandwidth product SAW filters
Authors:
- RuppelRURuppel
- ReindlREReindl
- WagnerWAWagner
- 1 January 1994
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 61-65 vol.1
Abstract
For years linear optimization algorithms have been used successfully in bandpass filter design. This method has been adopted for the design of pulse compression filters with low time-bandwidth products. In the bandpass filter design, the sidelobe level in the frequency domain is optimized for a fixed impulse response length. In case of the design of a low time-bandwidth product filters, we optimize the sidelobe suppression in the time domain for a fixed overall bandwidth. We get the optimum time response for a given frequency bandwidth and width of the compressed pulse. The spurious time response is minimized. The corresponding optimum frequency response is split up onto expander and compressor, each consisting of two chirped and apodized IDTs. As an example, an expander-compressor pair at 350 MHz with a 3 dB bandwidth of approximately 11 MHz, an overall bandwidth of approximately 33 MHz, and a chirp time of 1.0 μs was designed. The sidelobe suppression in the design is better than 40 dB. The measured filters exhibit a sidelobe level close to -40 dB. Design and measurement are in excellent agreementKeywords
This publication has 14 references indexed in Scilit:
- Modular two-dimensional analysis of SAW filters. I. TheoryIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1992
- Modular two-dimensional analysis of SAW filters. II. Analysis and compensation resultsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1992
- Design of SAW bandpass filters using new window functionsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1988
- Iterative Synthesis of Optimized Surface Acoustic Wave Chirp Waveform Conpression Filter Impulse Response1987
- Metal-RACs with Track Interference Weighting1986
- Optimum Design of SAW-Filters by Linear Programming1983
- Suppression of sidelobes in rectangular linear FM pulse compression radarProceedings of the IEEE, 1982
- RAC-Filters with Position Weighted Metallic Strip Arrays1982
- Surface Acoustic Wave Slanted Device TechnologyIEEE Transactions on Sonics and Ultrasonics, 1979
- On the use of windows for harmonic analysis with the discrete Fourier transformProceedings of the IEEE, 1978