Application of Additively Manufactured Pentamode Metamaterials in Sodium/Inconel 718 Heat Pipes
Open Access
Abstract
In this study, pentamode metamaterials were proposed for thermal stress accommodation of alkali metal heat pipes. Sodium/Inconel 718 heat pipes with and without pentamode metamaterial reinforcement were designed and fabricated. Then, these heat pipes were characterized by startup tests and thermal response simulations. It was found that pentamode metamaterial reinforcement did not affect the startup properties of sodium/Inconel 718 heat pipes. At 650–950 °C heating, there was a successful startup of heat pipes with and without pentamode metamaterial reinforcement, displaying uniform temperature distributions. A further simulation indicated that pentamode metamaterials could accommodate thermal stresses in sodium/Inconel 718 heat pipes. With pentamode metamaterial reinforcement, stresses in the heat pipes decreased from 12.9–62.1 to 10.2–52.4 MPa. As a result, sodium/Inconel 718 heat pipes could be used more confidently. This work was instructive for the engineering application of alkali metal heat pipes.Keywords
Funding Information
- National Natural Sciences Foundation (11172284)
This publication has 18 references indexed in Scilit:
- Fabrication of Sodium/Inconel 718 Heat Pipes for Combustor CoolingMicrogravity Science and Technology, 2019
- Fabrication of lithium/C-103 alloy heat pipes for sharp leading edge coolingHeat and Mass Transfer, 2017
- Preparation and testing of nickel-based superalloy/sodium heat pipesHeat and Mass Transfer, 2017
- Mechanical meta-materialsMaterials Horizons, 2016
- Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser meltingMaterials & Design (1980-2015), 2014
- Micro‐/Nanostructured Mechanical MetamaterialsAdvanced Materials, 2012
- Feasibility of Metallic Structural Heat Pipes as Sharp Leading Edges for Hypersonic VehiclesJournal of Applied Mechanics, 2009
- Startup of a horizontal lithium–molybdenum heat pipe from a frozen stateInternational Journal of Heat and Mass Transfer, 2003
- Fabrication and Testing of a Leading-Edge-Shaped Heat PipeJournal of Spacecraft and Rockets, 1999
- Four Space Shuttle Wing Leading Edge ConceptsJournal of Spacecraft and Rockets, 1974