A New Planar Potentiometric Sensor for In Situ Measurements
Open Access
Abstract
A new construction of a potentiometric sensor was introduced for the first time. It relies on the use of two membranes instead of one, as in the well-known coated-disc electrode. For this purpose, a new electrode body was constructed, including not one, but two glassy carbon discs covered with an ion-selective membrane. This solution allows for the sensor properties to be enhanced without using additional materials (layers or additives) on the membrane. The new construction is particularly useful for in situ measurements in environmental samples. Two ion-selective polymeric membranes were used, namely H+ and K+-selective membranes, to confirm the universality of the idea. The tests conducted included chronopotentiometric tests, electrochemical impedance spectroscopy, and potentiometric measurements. The electrical and analytical parameters of the sensors were evaluated and compared for all tested electrodes to evaluate the properties of the planar electrode versus previously known constructions. Research has shown that the application of two membranes instead of one allows for the resistance of an electrode to be lowered and for the electrical capacitance to be elevated. Improving the electrical properties of an electrode resulted in the enhancement of its analytical properties. The pH measurement range of the planar electrode is 2–11, which is much wider in contrast to that of the single-membrane electrode. The linear range of the K+-selective planar electrode is wider than that of the coated-disc electrode and equals 10−6 to 10−1 M. The response time turned out to be a few seconds shorter, and the potential drift was smaller due to the application of an additional membrane in the electrode construction. This research creates a new opportunity to design robust potentiometric sensors, as the presented construction is universal and can be used to obtain electrodes selective to various ions.Keywords
Funding Information
- Excellence initiative-research university” at the AGH University of Science and Technology
This publication has 37 references indexed in Scilit:
- Ruthenium dioxide nanoparticles as a high-capacity transducer in solid-contact polymer membrane-based pH-selective electrodesMicrochimica Acta, 2019
- Ordered mesoporous carbon sphere-based solid-contact ion-selective electrodesJournal of Materials Science, 2019
- A solid-contact potassium-selective electrode with MoO2 microspheres as ion-to-electron transducerAnalytica Chimica Acta, 2017
- Ion-selective electrodes with superhydrophobic polymer/carbon nanocomposites as solid contactCarbon, 2015
- Solid-contact pH-selective electrode using multi-walled carbon nanotubesAnalytical and Bioanalytical Chemistry, 2009
- To the Memory of Ernő Pungor: A Subjective View on the History of Ion‐Selective ElectrodesElectroanalysis, 2009
- Screen-printed reference electrodes for potentiometric measurementsAnalytica Chimica Acta, 2004
- Screen printing: a technology for the batch fabrication of integrated chemical-sensor arraysSensors and Actuators B: Chemical, 1994
- A double-membrane ion-selective electrode for the potentiometric determination of potassiumMicrochemical Journal, 1989
- Ion specific electrochemical behavior of macrotetrolides in membranesMicrochemical Journal, 1967