Dynamic Temperature Rise Mechanism and Some Controlling Factors of Wet Clutch Engagement
Authors:
Open Access
- 1 January 2016
- journal article
- research article
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2016, 1-12
Abstract
The friction transmission model of wet clutch is established to analyze the friction transmission mechanism of its engagement. The model is developed by applying both the average flow model and the elastic contact model between the friction disk and separator plate. The key components during wet clutch engagement are the separator plate, friction disk, and lubricant. The one-dimension transient models of heat transfer in radial direction for the three components are built on the basis of the heat transfer theory and the conservation law of energy. The friction transmission model and transient heat transfer models are coupled and solved by using the Runge-Kutta numerical method, and the radial temperature distribution and their detailed parametric study for the three components are conducted separately. The simulation results show that the radial temperature for the three components rises with the increase of radius in engagement. The changes in engagement pressure, lubricant viscosity, friction lining permeability, combined surface roughness RMS, equivalent elasticity modulus, difference between dynamic and static friction coefficients, and lubricant flow have important influence on the temperature rise characteristics. The proposed models can get better understanding of the dynamic temperature rise characteristics of wet clutch engagement.Keywords
Funding Information
- National Natural Science Foundation of China (51205432, KF1502)
- Hunan Province Key Laboratory of Safety Design and Reliability Technology for Engineering Vehicle (51205432, KF1502)
This publication has 10 references indexed in Scilit:
- A two-level Iterative Learning Control scheme for the engagement of wet clutchesMechatronics, 2011
- Three-Dimensional Thermohydrodynamic Analysis of a Wet Clutch With Consideration of Grooved Friction SurfacesJournal of Tribology, 2010
- Thermal analysis of a wet-disk clutch subjected to a constant energy engagementInternational Journal of Heat and Mass Transfer, 2008
- Flash Temperature in ClutchesSAE International Journal of Advances and Current Practices in Mobility, 2005
- Generation of hot spots in a wet multidisk clutch during short-term engagementWear, 2003
- MULTIPLE ENGAGEMENT WET CLUTCH HEAT TRANSFER MODELNumerical Heat Transfer, Part A: Applications, 2002
- Analytical and Numerical Modeling of Engagement of Rough, Permeable, Grooved Wet ClutchesJournal of Tribology, 1997
- Numerical Simulation of Engagement of Paper Based Wet Clutch FacingJournal of Tribology, 1994
- Application of Average Flow Model to Lubrication Between Rough Sliding SurfacesJournal of Lubrication Technology, 1979
- Prediction of the Bulk Temperature in Spur Gears Based on Finite Element Temperature AnalysisA S L E Transactions, 1979