Experimental evaluation of designs for the simulated countercurrent moving bed separator
Authors:
- 1 March 1996
- journal article
- separations
- Published by Wiley in AIChE Journal
- Vol. 42 (3) , 683-690
Abstract
Simulated countercurrent chromatography is a continuous flow method for separation of binary mixtures or for separation of multicomponent mixtures into two fractions. Countercurrent flow is simulated by moving the feed point past several fixed adsorbent beds at a rate between the single column breakthrough time of each component. The number of columns and the location of the inlet and outlet port were varied to investigate product purity and productivity. Concentration profiles of the effluent product streams were measured. The maximum product concentration exceeds the feed concentration during part of the feed‐switching cycle and drops to zero during part of the cycle. Three configurations were tested with the total number of columns varying between three and eight. For the test separation chosen, gaseous propylene and dimethyl ether on Chromosorb 101, high purity (> 99%) product streams were obtained with an optimal four‐column configuration using three desorbent streams.Keywords
This publication has 36 references indexed in Scilit:
- Experimental and modeling studies on the transient behavior of a simulated countercurrent adsorber.JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1991
- Comparison of Efficiency in Separation of Maltose and Glucose between Conventional Batch Chromatography and Simulated Moving-Bed Adsorber.KAGAKU KOGAKU RONBUNSHU, 1991
- A simplified design method for a simulated moving-bed adsorber.KAGAKU KOGAKU RONBUNSHU, 1990
- A Plate Model for Moving Feed-Injection Chromatography. II. Experimental ResultsSeparation Science and Technology, 1987
- Continuous separation of glucose-salts mixture with nonlinear and linear adsorption isotherms by using a simulated moving-bed adsorber.JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1987
- The separation of glutathione and glutamic acid using a simulated moving-bed adsorber systemJournal of Fermentation Technology, 1987
- A Plate Model for Moving Feed-Injection Chromatography. I. Simulation ResultsSeparation Science and Technology, 1987
- Numerical simulation of a semi-continuous counter-current adsorption unit for fructose-glucose separationThe Chemical Engineering Journal, 1986
- ENZYME PURIFICATION AND CONCENTRATION BY SIMULATED MOVING BED CHROMATOGRAPHY: AN EXPERIMENTAL STUDYChemical Engineering Communications, 1986
- Production scale organic mixture separation using a new sequential chromatographic machineAnalytical Chemistry, 1973