Characterization of bio-oil and bio-char produced by low-temperature microwave-assisted pyrolysis of olive pruning residue using various absorbers
Authors:
Open Access
- 14 August 2019
- journal article
- research article
- Published by SAGE Publications in Waste Management & Research: The Journal for a Sustainable Circular Economy
- Vol. 38 (2) , 213-225
Abstract
Olive pruning residue is largely formed during cultivation, and is usually disposed through open-air combustion directly in the field, but this habit is a possible source of pollution. The pyrolytic conversion of olive pruning residue has been run in a new and very appealing way using microwave as a heating source and different microwave absorbers in a multimode batch reactor. In this way, olive residue is converted into interesting bio-chemical products with a short pyrolysis time, ranging from 15 to 36 min, and with a peak temperature ranging from 450 K to 705 K according to the different microwave absorber. Thus, a very efficient and selective system was realized, which was able to address the process towards the formation of a large amount of bio-char (up to 61.2%) or a high formation of bio-oil (56.2%) and gas (41.7%) with a very low formation of bio-char (2.1%). However, when carbon and iron were used as microwave absorbers, it was possible to obtain an intermediate amount of bio-char (26-30%) and bio-oil (40 wt%). Bio-oils were collected as dark-brown liquids with low viscosity and density. A bio-oil with a low water concentration was obtained using carbon or iron as the microwave absorber. The bio-oils formed in all experiments contained a very large amount of acetic acid, even when NaOH was the microwave absorber. Furthermore, a large amount of aromatics were present in the bio-oil obtained using carbon as the microwave absorber.Keywords
Funding Information
- Università degli Studi di Firenze
This publication has 47 references indexed in Scilit:
- Fresh olive mill waste deprived of polyphenols as feedstock for hydrogen photo-production by means of Rhodopseudomonas palustris 42OLRenewable Energy, 2013
- Catalytic effects of NaOH and Na2CO3 additives on alkali lignin pyrolysis and gasificationApplied Energy, 2012
- Environmental impacts of olive oil production: a Life Cycle Assessment case study in the province of Messina (Sicily)Journal of Cleaner Production, 2012
- Integrating olive grove maintenance and energy biomass recovery with a single-pass pruning and harvesting machineBiomass and Bioenergy, 2011
- Catalytic Upgrading of Biomass Fast Pyrolysis Vapors with Nano Metal Oxides: An Analytical Py-GC/MS StudyEnergies, 2010
- Industrial harvesting of olive tree pruning residue for energy biomassBioresource Technology, 2010
- Electrical and magnetic properties of nanomaterials containing iron or cobalt nanoparticlesInorganic Materials, 2007
- Olive bagasse (Olea europea L.) pyrolysisBioresource Technology, 2006
- Bio-oil production from rapid pyrolysis of cottonseed cake: product yields and compositionsInternational Journal of Energy Research, 2006
- An overview on olive mill wastes and their valorisation methodsWaste Management, 2006