Porous 2H‐Silicon Carbide Ceramics Fabricated by Carbothermal Reaction between Silicon Nitride and Carbon
- 1 June 2003
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 86 (6) , 910-914
Abstract
Porous SiC ceramics were synthesized by sintering pressed and pressed/CIPed powder compacts of α‐Si 3 N 4 , carbon (Si 3 N 4 :C = 1:3 mol as ratio), and sintering aids, at 1600°C for few hours to achieve a reaction, and subsequently sintering at a temperature range of 1750°–1900°C, in an argon atmosphere. High porosities from 45%–65% were achieved by low shrinkage with large weight loss. Formation of pure 2H‐SiC phase via a reaction between Si 3 N 4 and carbon can be demonstrated by X‐ray diffractometry. The resultant porous SiC samples were characterized by SiC grain microstructures, pore‐size distribution, and flexural strength. This method has the advantage of fabricating high‐porous SiC ceramics with fine microstructure and good properties at a relatively low temperature.Keywords
This publication has 35 references indexed in Scilit:
- Preparation of silicon carbide reticulated porous ceramicsMaterials Science and Engineering: A, 2002
- Fabrication of Low‐Shrinkage, Porous Silicon Nitride Ceramics by Addition of a Small Amount of CarbonJournal of the American Ceramic Society, 2001
- Fabrication of Porous Ceramics with Unidirectionally Aligned Continuous PoresJournal of the American Ceramic Society, 2001
- Bulk alumina support with high tolerant strain and its reinforcing mechanismsActa Materialia, 2001
- Synthesis of Porous Ceramics with Complex Pore Structure by Freeze‐Dry ProcessingJournal of the American Ceramic Society, 2001
- New Uniformly Porous CaZrO 3 /MgO Composites with Three‐Dimensional Network Structure from Natural DolomiteJournal of the American Ceramic Society, 2000
- Relation between porosity and pore size or pressure drop of fibrous SiC filter prepared from carbonized cellulose-powder preformsMaterials Science and Engineering: A, 1998
- Porous Materials1998
- Advantages of an integrated system for hot gas filtration using rigid ceramic elementsFiltration + Separation, 1994
- Oxidation mechanism of porous silicon nitrideJournal of Materials Science, 1984