Synthetically focused guided wave imaging techniques have previously been employed for plate like structures. Much work has been has been done using algorithms such as the synthetic aperture focusing technique (SAFT), the total focusing method (TFM) and common source method (CSM) using both linear and circular arrays. The resolutions for such algorithms for the plate case are well known. We have attempted to use these algorithms for imaging defects in pipes using an array of piezoelectric shear transducers clamped around the pipe circumference. We show that the SAFT and the TFM methods both suffer from coherent noise in the image caused by circumferentially propagating wave modes. It is shown that the common source method (CSM) method does not suffer from this problem though the resolution obtained is poorer. Results from the different imaging algorithms are presented for an 8 inch pipe using 50 kHz excitation, both from finite element simulations and laboratory experiments.