Temporary bond-debond process for manufacture of flexible electronics: Impact of adhesive and carrier properties on performance
Authors:
- 1 December 2010
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 108 (11) , 114917
Abstract
Manufacturing of microelectronics on flexible substrates is challenged by difficulties in maintaining alignment and conformity of the substrate through deposition, patterning, and etch processes. To address these difficulties, a temporary bond-debond method has been developed for effective automated handling of flexible substrate systems during electronics fabrication. The flexible substrate is temporarily bonded to a rigid carrier, which provides structural support and suppresses bending during processing. The photolithographic alignment of the bonded system is strongly dependent upon the viscoelastic properties of the bonding adhesive. An additional challenge is to control the stress developed during processing; these stresses evolve predominately through thermomechanical property mismatches between the carrier and flexible substrate. To investigate the role of the thermomechanical properties of the carrier and adhesive, the stress, and subsequent bowing of bonded systems (flexible substrate-adhesive-carrier) is examined systematically using different carriers and adhesives. Excellent registration of the flexible circuitry fabricated on the bonded system with low stress can be achieved by using a viscoelastic adhesive with a low loss factor and a carrier with high modulus and coefficient of thermal expansion that is closely matched to the flexible substrate. This bond-debond process enables the high yield fabrication of flexible microelectronics on plastic substrates.
Keywords
This publication has 14 references indexed in Scilit:
- Overview of Flexible Electronics Technology2009
- Thermal stresses analysis in adhesive/solder bonded bimaterial assembliesJournal of Applied Physics, 2008
- Reel to Real: Prospects for Flexible DisplaysProceedings of the IEEE, 2005
- Flexible Electronics and Displays: High-Resolution, Roll-to-Roll, Projection Lithography and Photoablation Processing Technologies for High-Throughput ProductionProceedings of the IEEE, 2005
- Stress control for overlay registration in a‐Si:H TFTs on flexible organic‐polymer‐foil substratesJournal of the Society for Information Display, 2005
- Roll‐to‐Roll Manufacturing of Flexible Displays2005
- Flexible Flat Panel Display Technology2005
- Mechanical properties of thin and thick coatings applied to various substrates. Part I. An elastic analysis of residual stresses within coating materialsJournal of Adhesion Science and Technology, 1997
- Elastic relationships in layered composite media with approximation for the case of thin films on a thick substrateJournal of Applied Physics, 1987
- The tension of metallic films deposited by electrolysisProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1909