Durable Superhydrophobic Surfaces Prepared by Spray Coating of Polymerized Organosilane/Attapulgite Nanocomposites
- 5 September 2013
- journal article
- research article
- Published by Wiley in Chempluschem
- Vol. 78 (12) , 1503-1509
Abstract
Complicated and expensive preparation methods and the low stability of most superhydrophobic surfaces are the bottlenecks that must be faced for their practical application. Herein, a simple and low‐cost approach for preparing durable superhydrophobic surfaces by spray coating of polymerized organosilane/attapulgite (POS/APT) nanocomposites is reported. The POS/APT nanocomposites were prepared by condensation of hexadecyltriethoxysilane and tetraethoxysilane in the presence of APT through a modified Stöber method. The morphology and content of clay minerals have great influence on the superhydrophobicity. Only rodlike APT with a weight ratio of APT to organosilanes not less than 0.60 can form the superhydrophobic surfaces. The POS/APT superhydrophobic surfaces feature high water contact angle (CA≈160°), low sliding angle (SA≈2°), excellent stability, and good transparency. A spray coating density as low as 5 g m−2 is enough to obtain the superhydrophobic properties. The cost of such a coating is approximately 4 RMB m−2. The POS/APT surfaces are stable towards sand abrasion, water pressure, harsh temperature, UV irradiation, and solvent immersion. In addition, a slightly damaged surface can be readily repaired by spray coating again according to the same procedure. Moreover, the durable POS/APT superhydrophobic coatings are applicable to various substrates (e.g., polyurethane plate, paper, and polyester textile) and can be easily scaled up.Keywords
This publication has 44 references indexed in Scilit:
- Silica/Silicone Nanofilament Hybrid Coatings with Almost Perfect SuperhydrophobicityChemphyschem, 2013
- A facile approach to robust superhydrophobic 3D coatings via connective-particle formation using the electrospraying processChemical Communications, 2012
- Combination of Bioinspiration: A General Route to Superhydrophobic ParticlesJournal of the American Chemical Society, 2012
- Bioinspired Super-antiwetting Interfaces with Special Liquid−Solid AdhesionAccounts of Chemical Research, 2009
- Alumina nanowire forests via unconventional anodization and super-repellency plus low adhesion to diverse liquidsChemical Communications, 2009
- A Simple, One‐Step Approach to Durable and Robust Superhydrophobic TextilesAdvanced Functional Materials, 2008
- Bioinspired Superhydrophobic Coatings of Carbon Nanotubes and Linear π Systems Based on the “Bottom‐up” Self‐Assembly ApproachAngewandte Chemie, 2008
- Progess in superhydrophobic surface developmentSoft Matter, 2007
- Tuning microchannel wettability and fabrication of multiple-step Laplace valvesLab on a Chip, 2007
- What do we need for a superhydrophobic surface? A review on the recent progress in the preparation of superhydrophobic surfacesChemical Society Reviews, 2007