Compressive Stress-Strain Behavior of REBCO Coated Conductors and Cables
- 22 February 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-6
Abstract
Rare earth barium copper oxide (REBCO) coated conductor tapes and cables are promising material candidates for constructing high field magnets. In both the magnet constructing stage and operation stage, transverse pressure is exerted on the tapes/cables. Therefore, understanding the mechanical behavior of tapes/cable under transverse pressure and figuring out certain properties, such as modulus and stress limits, will be helpful for magnet design and magnet simulation study. We accomplished these goals by performing compression tests on several commonly used tapes/cables in high field magnets. We found that the mechanical behavior of tape stacks can be characterized in three distinct regimes. In the first regime (60 MPa), the REBCO tape stack and its Ni-plated derivative had a modulus of 10 $ \pm $ 11% GPa and 4.6 $ \pm $ 9% GPa respectively. Roebel cable had similar mechanical behavior to the tape stack with three regimes, and the second and third regimes showed a modulus of 3.1 $ \pm $ 5% GPa and 9.1 $ \pm $ 11% GPa respectively. The conductor on round core (CORC) cable was more vulnerable to stress, and its fracture stress was around 27 MPa.
Keywords
Funding Information
- U.S. Department of Energy
- Office of Science
- Division of High Energy Physics (DE SC0011721)
This publication has 35 references indexed in Scilit:
- Electro-mechanical properties of REBCO coated conductors from various industrial manufacturers at 77 K, self-field and 4.2 K, 19 TSuperconductor Science and Technology, 2015
- Characterization of Roebel Cables for Potential Use in High-Field MagnetsIEEE Transactions on Applied Superconductivity, 2014
- Recent Developments in High-Temperature Superconducting Magnet Technology (Review)IEEE Transactions on Applied Superconductivity, 2013
- Mechanical properties of nickel fabricated by electroplating with supercritical CO2 emulsion evaluated by micro-compression test using non-tapered micro-sized pillarMicroelectronic Engineering, 2013
- Effect of Winding Tension on Electrical Behaviors of a No-Insulation ReBCO Pancake CoilIEEE Transactions on Applied Superconductivity, 2013
- Effect of transverse load on the critical current of a coated conductor Roebel cableSuperconductor Science and Technology, 2013
- Characterization of a high-temperature superconducting conductor on round core cables in magnetic fields up to 20 TSuperconductor Science and Technology, 2013
- Remarkable weakness against cleavage stress for YBCO-coated conductors and its effect on the YBCO coil performancePhysica C: Superconductivity and its Applications, 2011
- Compact GdBa2Cu3O7–δcoated conductor cables for electric power transmission and magnet applicationsSuperconductor Science and Technology, 2011
- YBa2Cu3O7−δcoated conductor cabling for low ac-loss and high-field magnet applicationsSuperconductor Science and Technology, 2009