Effects of Thermal Crosslinking on the Properties and Release Profiles of Three-Dimensional (3D)-Printed Poly Vinyl Alcohol (PVA) Tablets
- 1 August 2020
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 859, 258-264
Abstract
The objective of this study was to investigate the effects of thermal crosslinking on the properties of 3D-printed poly-vinyl alcohol (PVA) tablets loaded with fluorescein sodium (NaFl). The PVA filaments were selected for the fabrication of 3D-printed tablets. Different infill densities (80% and 100%) of the tablets were applied. The tablets were crosslinked at different temperatures and times. The physiochemical properties of the tablets and the release profiles of fluorescein from the 3D-tablets were investigated. The 3D-printed PVA tablets were successfully produced with favorable physical and mechanical properties. A smooth surface with a mesh pattern was obtained with a yellow color of NaFl. The 100% infilled tablets provided slightly greater loading efficiency and loading capacity in comparison with the 80% infilled tablets. The release of NaFl increased with an increase in crosslinking time and temperature. However, crosslinking at 140 °C for 4 h (80% CFT4 and 100%CFT4) showed similar release characteristic compared to the non-crosslink one. The release kinetics of 3D-printed tablets were observed to be Quasi-Fickian diffusion mechanism.Keywords
This publication has 9 references indexed in Scilit:
- Advanced Pharmaceutical Applications of Hot-Melt Extrusion Coupled with Fused Deposition Modelling (FDM) 3D Printing for Personalised Drug DeliveryPharmaceutics, 2018
- Combination of 3D printing technologies and compressed tablets for preparation of riboflavin floating tablet-in-device (TiD) systemsInternational Journal of Pharmaceutics, 2018
- Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printingInternational Journal of Pharmaceutics, 2018
- Comparison of cell behavior on pva/pva-gelatin electrospun nanofibers with random and aligned configurationScientific Reports, 2016
- 3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tabletsEuropean Journal of Pharmaceutics and Biopharmaceutics, 2015
- Physical stabilisation of electrospun poly(vinyl alcohol) nanofibres: comparative study on methanol and heat-based crosslinkingJournal of Materials Science, 2014
- Fused-filament 3D printing (3DP) for fabrication of tabletsInternational Journal of Pharmaceutics, 2014
- United States Pharmacopeia and National Formulary (USP-NF)2008
- Studies On The Crosslinking Of Poly (Vinyl Alcohol)Journal of Polymer Research, 2005