Combustion Study of Polyoxymethylene Dimethyl Ethers and Diesel Blend Fuels on an Optical Engine
Open Access
Abstract
Polyoxymethylene dimethyl ethers (PODE) are a newly appeared promising oxygenated alternative that can greatly reduce soot emissions of diesel engines. The combustion characteristics of the PODE and diesel blends (the blending ratios of PODE are 0%, 20%, 50% and 100% by volume, respectively) are investigated based on an optical engine under the injection timings of 6, 9, 12 and 15-degree crank angles before top dead center and injection pressures of 100 MPa, 120 MPa and 140 MPa in this study. The results show that both the ignition delay and combustion duration of the fuels decrease with the increasing of PODE ratio in the blends. However, in the case of the fuel supply of the optical engine being fixed, the heat release rate, cylinder pressure and temperature of the blend fuels decrease with the PODE addition due to the low lower heating value of PODE. The addition of PODE in diesel can significantly reduce the integrated natural flame luminosity and the soot formation under all injection conditions. When the proportion of the PODE addition is 50% and 100%, the chemical properties of the blends play a leading role in soot formation, while the change of the injection conditions have an inconspicuous effect on it. When the proportion of the PODE addition is 20%, the blend shows excellent characteristics in a comprehensive evaluation of combustion and soot reduction.Keywords
Funding Information
- Innovation Capability Support Program of Shaanxi (2021TD-28)
- Key Research and Development Projects of Shaanxi Province (2019ZDLGY15-07)
This publication has 41 references indexed in Scilit:
- Study on combustion and emission characteristics of Polyoxymethylene Dimethyl Ethers/diesel blends in light-duty and heavy-duty diesel enginesApplied Energy, 2017
- Effects of diesel/PODE (polyoxymethylene dimethyl ethers) blends on combustion and emission characteristics in a heavy duty diesel engineFuel, 2016
- Improvement of emission characteristics and thermal efficiency in diesel engines by fueling gasoline/diesel/PODEn blendsEnergy, 2016
- Performance, combustion and emission characteristics of a diesel engine fueled with polyoxymethylene dimethyl ethers (PODE3-4)/ diesel blendsEnergy, 2015
- Chemical equilibrium controlled synthesis of polyoxymethylene dimethyl ethers over sulfated titaniaJournal of Energy Chemistry, 2015
- Mechanism of chain propagation for the synthesis of polyoxymethylene dimethyl ethersJournal of Energy Chemistry, 2013
- Soot temperature and KL factor for biodiesel and diesel spray combustion in a constant volume combustion chamberApplied Energy, 2013
- Synthesis of polyoxymethylene dimethyl ethers from methanol and trioxymethylene with molecular sieves as catalystsJournal of Fuel Chemistry and Technology, 2011
- Optical diagnostics for soot and temperature measurement in diesel enginesProgress in Energy and Combustion Science, 1998
- Determination of True Temperature and Total Radiation from Luminous Gas FlamesIndustrial & Engineering Chemistry Analytical Edition, 1932