A Frequency Doubler/Modulator With 4.5 dBm Output Power at 170 GHz Using SiGe HBTs
Authors:
- 2 February 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 25 (3) , 181-183
Abstract
A sub-terahertz frequency doubler with signal modulation is proposed and analyzed in this letter. An 85 GHz input signal is modulated by a differential pair, and a push-push frequency doubler with capacitive degeneration technique is designed to obtain the 170 GHz modulated output signal. Via the use of negative impedance to eliminate the leakage current of transistors, the proposed enhanced push-push frequency doubler achieves a power efficiency of 8.5% and a maximum output power of 4.5 dBm at 170 GHz without applying a modulation signal. The 0.13 μm SiGe BiCMOS process is used to fabricate the proposed design and the total chip area is 0.75 × 0.8 mm 2 .Keywords
This publication has 5 references indexed in Scilit:
- 160-GHz Power Amplifier Design in Advanced SiGe HBT Technologies With ${P}_{\rm sat}$ in Excess of 10 dBmIEEE Transactions on Microwave Theory and Techniques, 2012
- A 245 GHz transmitter in SiGe technology2012
- An ultra-wideband D-Band signal source chip using a fundamental VCO with frequency doubler in a SiGe bipolar technology2012
- $W$-Band Amplifiers With 6-dB Noise Figure and Milliwatt-Level 170–200-GHz Doublers in 45-nm CMOSIEEE Transactions on Microwave Theory and Techniques, 2011
- A novel HBT distributed amplifier design topology based on attenuation compensation techniquesIEEE Transactions on Microwave Theory and Techniques, 1994