Prediction and Optimization Algorithm for Intersection Point of Spatial Multi-Lines Based on Photogrammetry
Open Access
Abstract
The basic theory of photogrammetry is mature and widely used in engineering. The environment in engineering is very complex, resulting in the corners or multi-line intersections being blocked and unable to be measured directly. In order to solve this problem, a prediction and optimization algorithm for intersection point of spatial multi-lines based on photogrammetry is proposed. The coordinates of points on space lines are calculated by photogrammetry algorithm. Due to the influence of image point distortion and point selection error, many lines do not strictly intersect at one point. The equations of many space lines are used to fit their initial value of intersection point. The initial intersection point is projected onto each image, and the distances between the projection point and each line on the image plane are used to weight the calculated spatial lines in combination with the information entropy. Then the intersection point coordinates are re-fitted, and the intersection point is repeatedly projected and recalculate until the error is less than the threshold value or reached the set number of iterations. Three different scenarios are selected for experiments. The experimental results show that the proposed algorithm significantly improves the prediction accuracy of the intersection point.Keywords
This publication has 31 references indexed in Scilit:
- Station-transfer measurement accuracy improvement of laser tracker based on photogrammetryMeasurement, 2016
- Real-time structured light profilometry: a reviewOptics and Lasers in Engineering, 2016
- Photogrammetric techniques for aerospace applicationsProgress in Aerospace Sciences, 2012
- The wind tunnel tests of wind pressure acting on the derrick of deepwater semi-submersible drilling platformEnergy Procedia, 2012
- A Novel Fast Method for L ∞ Problems in Multiview Geometry2012
- Evaluation Method of Remaining Fatigue Life for Crane Based on the Acquisition of the Equivalent Load Spectrum by the Artificial Neural NetworkJournal of Mechanical Engineering, 2011
- Practical Global Optimization for Multiview GeometryInternational Journal of Computer Vision, 2007
- Non-parametric adaptive region of support useful for corner detection: a novel approachPattern Recognition, 2004
- A comparative review of camera calibrating methods with accuracy evaluationPattern Recognition, 2002
- A flexible new technique for camera calibrationIEEE Transactions on Pattern Analysis and Machine Intelligence, 2000