Pultruded FRP Plank as Formwork and Reinforcement for Concrete Members
- 1 October 2007
- journal article
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 10 (5) , 525-535
Abstract
A feasibility study in which the use of a commercially produced pultruded fiber reinforced polymer (FRP) plank for both permanent formwork and secondary or primary tensile reinforcement of a concrete structural member is described in this paper. To achieve satisfactory bond at the interface between the smooth surface of the FRP plank and the concrete, two kinds of aggregate, gravel and sand, were epoxy bonded to the planks. Concrete beams using the aggregate-coated FRP planks were fabricated and tested. Satisfactory bond between the FRP plank and the concrete was developed which was evidenced by numerous well-distributed flexural cracks, and ultimate capacities of the aggregate coated FRP plank specimens greater than the steel rebar reinforced control specimen. ACI 440 equations were found to provide good predictions of the flexural strengths but poor predictions of the shear strengths of the FRP plank reinforced beams. ACI 318 equations, however, provided good shear strength predictions.Keywords
This publication has 9 references indexed in Scilit:
- Construction and cost analysis of an FRP reinforced concrete bridge deckConstruction and Building Materials, 2006
- Cost-Effective, Structural Stay-in-Place Formwork System of Fiber - Reinforced Polymer for Accelerated and Durable Bridge Deck ConstructionTransportation Research Record: Journal of the Transportation Research Board, 2006
- Assessment of a Steel-Free Fiber Reinforced Polymer-Composite Modular Bridge SystemJournal of Structural Engineering, 2005
- The use of advanced polymer composites to form an economic structural unitConstruction and Building Materials, 2003
- Closure to “Behavior of Transverse Confining Systems for Steel-Free Deck Slabs,” by Baidar Bakht and Clifford LamJournal of Bridge Engineering, 2002
- Concrete Bridge Decks Constructed with Fiber-Reinforced Polymer Stay-in-Place Forms and Grid ReinforcingTransportation Research Record: Journal of the Transportation Research Board, 2002
- Behavior of Transverse Confining Systems for Steel-Free Deck SlabsJournal of Bridge Engineering, 2000
- Combined FRP Reinforcement and Permanent Formwork for Concrete MembersJournal of Composites for Construction, 1998
- Innovative Design of FRP Combined with Concrete: Short-Term BehaviorJournal of Structural Engineering, 1995