Fabrication of Flame Retarded Cellulose Aerogel with Hydrophobicity via MF/MTMS Double Cross-Linking
Open Access
- 18 October 2022
- journal article
- research article
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 20 (1)
Abstract
In order to overcome the disadvantage of highly flammable and poor mechanical performance of cellulose aerogel, herein, cellulose nanofibrils (CNF) were cross-linked by melamine formaldehyde (MF), and further cross-linked and surface decorated by methyltrimethoxysilane (MTMS) to obtain flame retarded compound aerogels. FT-IR spectra confirmed that cross-linking reaction occurred between MF/MTMS and CNF matrix. The morphological analysis demonstrated that the pore size shrinked, whereas the pore amount of compound aerogels increased after cross-linking, thereby resulting in the improvement of mechanical performance. Via double cross-linking, the compound aerogels also exhibited excellent hydrophobicity (contact angle up to 132.3°) and flame retardant properties. The limited oxygen index (LOI) value of double cross-linked specimen (Si-CNF/MF) increased from 19.5% to 37.1%, and the vertical combustion test (UL-94) reached V-0 grade. Microcalorimetry measurement showed that the peak heat release rate (pHRR) and total heat release (THR) of Si-CNF/MF decreased by 50.6% and 64.3% in comparison with pure CNF aerogel, respectively. The analysis results of char residue showed that both condensed phase and gas phase flame retardant mechanisms occurred during combustion, and synergistic effect existed between MF and MTMS. Moreover, the very low thermal conductivity of compound aerogels permitted their application as heat preservation materials.Keywords
Funding Information
- the Foundation of Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, College of Light Industry and Food Engineering, Guangxi University (No. 2021KF30)
- the Key Research & Development Project of Shaanxi Province (No. 2019GY-195)
This publication has 29 references indexed in Scilit:
- Advanced thermal insulation and absorption properties of recycled cellulose aerogelsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2014
- Drug release from nanoparticles embedded in four different nanofibrillar cellulose aerogelsEuropean Journal of Pharmaceutical Sciences, 2013
- Monodispersed or narrow-dispersed melamine–formaldehyde resin polymer colloidal spheres: preparation, size-control, modification, bioconjugation and particle formation mechanismJournal of Materials Chemistry B, 2012
- Rapid synthesis of amine cross-linked epoxy and methyl co-modified silica aerogels by ambient pressure dryingJournal of Non-Crystalline Solids, 2012
- Cellulosic Bionanocomposites: A Review of Preparation, Properties and ApplicationsPolymers, 2010
- Cellulose microfibres produced from banana plant wastes: Isolation and characterizationCarbohydrate Polymers, 2010
- Cellulose-based aerogelsPolymer, 2006
- Endoglucanase Degradation and Enzyme‐Aided Characterization of Cellulose AcetatesMacromolecular Symposia, 2005
- A Fourier transform infra-red spectroscopic analysis of the character of hydrogen bonds in amorphous cellulosePolymer, 1996
- Relation of certain infrared bands to cellulose crystallinity and crystal lattice type. Part II. A new infrared ratio for estimation of crystallinity in celluloses I and IIJournal of Applied Polymer Science, 1964