Optimal design of composite cylindrical shells subject to compression buckling strength
- 5 June 2023
- journal article
- research article
- Published by Emerald Publishing in Multidiscipline Modeling in Materials and Structures
- Vol. 19 (5) , 829-847
Abstract
Purpose: The objective of the present work is to present the design optimization of composite cylindrical shell subjected to an axial compressive load and lateral pressure.Design/methodology/approach: A novel optimization method is developed to predict the optimal fiber orientation in composite cylindrical shell. The optimization is carried out by coupling analytical and finite element (FE) results with a genetic algorithm (GA)-based optimization scheme developed in MATLAB. Linear eigenvalue were performed to evaluate the buckling behaviour of composite cylinders. In analytical part, besides the buckling analysis, Tsai-Wu failure criteria are employed to analyse the failure of the composite structure.Findings: The optimal result obtained through this study is compared with traditionally used laminates with 0, 90, ±45 orientation. The results suggest that the application of this novel optimization algorithm leads to an increase of 94% in buckling strength.Originality/value: The proposed optimal fiber orientation can provide a practical and efficient way for the designers to evaluate the buckling pressure of the composite shells in the design stage.Keywords
This publication has 18 references indexed in Scilit:
- Stacking sequence influence on imperfection sensitivity of cylindrical composite shells under axial compressionComposite Structures, 2015
- Optimum tailoring of fibre-steered longitudinally stiffened cylindersComposite Structures, 2015
- Analysis of the effect of stiffener profile on buckling strength in composite isogrid stiffened shell under axial loadingAerospace Science and Technology, 2013
- Buckling response of advanced grid stiffened carbon–fiber composite cylindrical shells with reinforced cutoutsComposites Part B: Engineering, 2013
- Multiobjective optimization of laminated composite cylindrical shells for maximum frequency and buckling loadMaterials & Design (1980-2015), 2009
- Boundary layer theory for the buckling and postbuckling of an anisotropic laminated cylindrical shell. Part I: Prediction under axial compressionComposite Structures, 2008
- Optimum design of filament-wound multilayer-sandwich submersible pressure hullsOcean Engineering, 2003
- Optimization for buckling loads of grid stiffened composite panelsComposite Structures, 2003
- Optimal laminations of thin underwater composite cylindrical vesselsComposite Structures, 2002
- Multiobjective design of laminated cylindrical shells for maximum torsional and axial buckling loadsComputers & Structures, 1997