The Design of a High-Throughput Hardware Architecture for the AES-GCM Algorithm
Authors:
- 15 November 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 70 (1) , 425-432
Abstract
This paper proposes the hardware architecture capable of processing the AES-GCM algorithm in parallel and pipeline. To boost the hardware efficiency, two parallel AES processing units, each consisting of a mixed inner-and outer-round pipelining architecture, are employed in the encryption/decryption module. These two AES units share a key expansion unit to save the hardware resource. To optimize the architecture of the AES algorithm, the S-box function is directly realized with the built-in BRAM in the FPGA technique to decrease the number of LUTs used, and implemented with the composite field operation in the ASIC technique in order to save up to 25% logic gates. In the GHASH module design, two pipelining finite field GF(2128) multipliers with appropriate data scheduling are utilized. In addition, realizing the finite field multiplication with the Karatsuba algorithm can further save 50.7% of hardware resource. The resulting AES-GCM IP has been implemented and verified with a Xilinx Virtex 5 series device (XC5VLX220), and a tsmc 0.18-μm cell library. In FPGA verification, the working frequency can achieve 223.314 MHz, yielding the maximum throughputs of 57.17 Gbps. The number of slices/BRAMs used is 5,944/109. The resulting ASIC can operate at 197.239 MHz in simulation and achieve a high throughput of 50.49 Gbps. The core area of the chip is 6,552 μm × 6,516 μm. The power consumption is 1,466.5 mW.Keywords
This publication has 11 references indexed in Scilit:
- Comparison of Three CPU-Core Families for IoT Applications in Terms of Security and Performance of AES-GCMIEEE Internet of Things Journal, 2019
- Implementation of S-Box for Advanced Encryption Standard2015
- Improved method for parallel AES-GCM cores using FPGAs2013
- Design and Efficient FPGA Implementation of Ghash Core for AES-GCM2010
- FPGA parallel-pipelined AES-GCM core for 100G Ethernet applications2010
- Improving Throughput of AES-GCM with Pipelined Karatsuba Multipliers on FPGAs2009
- High-Speed Parallel Hardware Architecture for Galois Counter Mode2007
- Efficient Implementation of AES IP2006
- High-speed hardware architectures for authenticated encryption mode GCM2006
- The design and implementation of MAC security in EPON2006