Experimental investigations of the aerated polymethylmethacrylate-based vertebral cement flow in capillaries
Open Access
- 18 July 2018
- journal article
- research article
- Published by SAGE Publications in The International Journal of Artificial Organs
- Vol. 41 (10) , 670-676
Abstract
Introduction: A constant growth in the population suffering from osteoporotic vertebral weakening is observed. As a result, vertebroplasty procedures become more and more common. Unfortunately, they may be associated with several complications occurring during bone cement injection, including its leakage or overheating of tissues. Despite several experimental studies, there is a lack of data related to random aeration of the bone cement. Therefore, the main objective of the following investigations was to emphasize that random aeration of the bone cement, and, consequently, a compressibility factor, could not be treated as a negligible factor during the vertebroplasty procedure and had to be taken into account in the development of the mathematical model. Materials and methods: A special test rig to reproduce the vertebroplasty procedure was designed and built. The authors conducted numerous experiments on polymethylmethacrylate-based bone cement flows, analyzing different flow conditions, such as volume flow rate and flow channel diameter. Time periods of the flow front between characteristic sections and pressures (differential and gauge) were measured. Results: All investigations revealed that bone cements mixed in special mixing kits were characterized by a random level of aeration which led to varied flow parameters. Comparing the experimental results with the theoretical values of the continuity equation, the highest difference in the flow duration reached 140%. Discussion: It has been proven that the aeration of the bone cement alters the flow dynamics. Therefore, much more data are required for statistical analysis to validate a mathematical model of the bone cement flow.Keywords
This publication has 14 references indexed in Scilit:
- Modelling and computation of acrylic bone cement injection and curing within the framework of vertebroplastyProceedings in Applied Mathematics and Mechanics, 2014
- Characterisation and modelling rheological properties of acrylic bone cement during applicationMechanics Research Communications, 2013
- Viscoelastic properties of injectable bone cements for orthopaedic applications: State‐of‐the‐art reviewJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2011
- NMP‐modified PMMA bone cement with adapted mechanical and hardening properties for the use in cancellous bone augmentationJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2009
- Preparation and characterization of bone cements incorporated with montmorilloniteJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2007
- Influence of initial component temperature on the apparent viscosity and handling characteristics of acrylic (PMMA) bone cementJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2006
- Testing and Performance of Bone Cements2006
- Influence of powder particle size distribution on complex viscosity and other properties of acrylic bone cement for vertebroplasty and kyphoplastyJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2005
- Influence of oscillatory mixing on the injectability of three acrylic and two calcium‐phosphate bone cements for vertebroplastyJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2003
- Rheological properties of acrylic bone cement during curing and the role of the size of the powder particlesJournal of Biomedical Materials Research, 2002