The present research focuses on the study of the precipitation of free ferrite in ductile iron during cooling through the intercritical temperature range. The main objectives are to recognize the morphology of the free ferrite precipitated in pearlitic ductile iron alloyed with Cu and Mn, and to evaluate the mechanical properties resulting from different microstructures. The microstructures investigated were generated by normalising heat treatments from regular and low austenitising temperatures. The results indicate that different free ferrite morphologies are produced depending on the thermal cycles carried out. As-cast samples present bull's eye morphology, while austenite grain boundary precipitation dominates in recrystallised structures. Low austenitising temperature normalising causes, in the alloys studied, the formation of a fine network of free ferrite precipitated within the pearlitic matrix at the recrystallised austenite grain boundaries. Low austenitising temperature normalising markedly improved the mechanical properties of ductile iron, surpassing the elongation of conventional normalising, and retaining similar levels of hardness and strength. This treatment has been found useful to counterbalance low ductility induced by intercellular carbide precipitation.