Properties and Microstructure of Treated Coal Bottom Ash as Cement Concrete Replacement
Open Access
- 1 April 2024
- journal article
- research article
- Published by Ital Publication in Civil Engineering Journal
- Vol. 10 (4) , 1125-1144
Abstract
Sustainable construction is a rapidly growing area of research focused on using industrial waste to replace Portland cement in concrete. This approach not only reduces CO2emissions from cement production but also serves as an effective way to diminish the environmental impact of concrete production. This study aims to investigate the properties of Coal Bottom Ash (CBA) after undergoing two different treatments: flotation and burning. It also evaluates the impact of CBA as a cement replacement in concrete with different replacement percentages (5%, 10%, 15%, and 20%). Chemical analysis of CBA has revealed that it can be classified as a pozzolanic material due to its high content of silicates, aluminates, and iron oxides. The microstructure of CBA showed a porous, angular, and irregular surface with many voids. The findings of this study revealed that the optimum mix was 10% CBA, resulting in a 2% increase in compressive strength compared to the control mix after 56 days of curing. Additionally, the study evaluated the effects of sulfate and chloride on concrete. It was found that the mix with the burning treatment showed an overall increase in strength, while the flotation treatment did not reach the control mix's strength in any of the curing periods. Furthermore, the results demonstrated that CBA has significant potential as a cement replacement material, and the burning treatment showed improvement in concrete's overall properties compared to the raw material in terms of mechanical and chemical properties while reducing greenhouse gas emissions and enhancing the environment. Doi: 10.28991/CEJ-2024-010-04-08 Full Text: PDFKeywords
This publication has 37 references indexed in Scilit:
- Microstructural and other properties of copper slag–coal bottom ash incorporated concrete using fly ash as cement replacementInnovative Infrastructure Solutions, 2023
- Mechanical Properties Optimization and Simulation of Soil–Saw Dust Ash Blend Using Extreme Vertex Design (EVD) MethodInternational Journal of Pavement Research and Technology, 2023
- High-volume fly ash Self Consolidating Concrete with coal bottom ash and recycled concrete aggregates: Fresh, mechanical and microstructural propertiesJournal of Building Engineering, 2022
- Investigation into the permeability and strength of pervious geopolymer concrete containing coated biomass aggregate materialJournal of Materials Research and Technology, 2021
- Reviewing the role of coal bottom ash as an alternative of cementConstruction and Building Materials, 2020
- Short-term effects of sulphate and chloride on the concrete containing coal bottom ash as supplementary cementitious materialEngineering Science and Technology, an International Journal, 2019
- Toxicity characteristics and durability of concrete containing coal ash as substitute for cement and river sandConstruction and Building Materials, 2017
- Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cementConstruction and Building Materials, 2016
- Effect of coal bottom ash as partial replacement of sand on workability and strength properties of concreteJournal of Cleaner Production, 2016
- Effect of sulfate concentration and associated cation type on concrete deterioration and morphological changes in cement hydratesConstruction and Building Materials, 2007