The influence of melt‐mixing process conditions on electrical conductivity of polypropylene/multiwall carbon nanotubes composites
- 9 May 2012
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 127 (2) , 1017-1026
Abstract
The influence of melt‐mixing parameters on the development of “network‐like” structure of multiwall carbon nanotubes (MWNTs) in injection‐molded polypropylene (PP)/MWNTs composites was assessed through AC electrical conductivity measurements. A higher melt‐mixing temperature (260°C as compared to 200, 220, and 240°C) at a fixed rotational speed of the screws (150 rpm) and at a fixed mixing time (15 min) has yielded maximum improvement in electrical conductivity in PP/MWNTs composites of 3 wt % MWNTs content. Next to higher melt‐mixing temperature, a variation in the melt‐mixing time has also led to a variation in electrical conductivity of the composites. Raman spectroscopic analysis revealed an increase in the ratio of intensity due to G‐band over that of D‐band (IG/ID) of the MWNTs in the “skin” region as compared to the “core” region of the injection‐molded composites irrespective of the melt‐mixing conditions. Microscopic observations could not provide much insight into the variation of MWNTs network‐like structure in various PP/MWNTs composites. An attempt has been made to understand the variation of network‐like structure of MWNTs in PP/MWNTs composites as a function of melt‐mixing parameters through electrical conductivity measurements, Raman spectroscopic analysis, and morphological investigations. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013Keywords
This publication has 37 references indexed in Scilit:
- Melt mixed nano composites of PA12 with MWNTs: Influence of MWNT and matrix properties on macrodispersion and electrical propertiesComposites Science and Technology, 2011
- Influence of initial mixing methods on melt‐extruded single‐walled carbon nanotube–polypropylene nanocompositesPolymer Engineering & Science, 2010
- Kinetics study on melt compounding of carbon nanotube/polypropylene nanocompositesJournal of Polymer Science Part B: Polymer Physics, 2009
- Predictions of effective physical properties of complex multiphase materialsMaterials Science and Engineering: R: Reports, 2008
- Stiffness and Thickness of Boron-Nitride NanotubesJournal of Nanoscience and Nanotechnology, 2008
- Mechanical Properties of Functionalized Single‐Walled Carbon‐Nanotube/Poly(vinyl alcohol) NanocompositesAdvanced Functional Materials, 2005
- Flow-induced properties of nanotube-filled polymer materialsNature Materials, 2004
- Ultra-low electrical percolation threshold in carbon-nanotube-epoxy compositesPolymer, 2003
- Helical microtubules of graphitic carbonNature, 1991
- The ‘universal’ dielectric responseNature, 1977