Effects of Material Composition and Water Content on the Mechanical Properties of Landslide Deposits Triggered by the Wenchuan Earthquake
- 18 February 2016
- journal article
- research article
- Published by Wiley in Acta Geologica Sinica - English Edition
- Vol. 90 (1) , 242-257
Abstract
Abundant landslide deposits were triggered by the Wenchuan earthquake, providing a rich source of material for subsequent debris flows or slope failures under rainfall conditions. A good understanding of the physical and mechanical properties of the landslide deposits is very important to the research on slope failure mechanisms and the initiation of debris flow. Laboratory biaxial compression tests are used to study the material compositions and water content impacts on the mechanical properties of landslide deposits, and a discrete element method (a bond‐contact model) is used to study the particle stiffness, bond force, friction coefficient and confining stress impact on the mechanical behaviors and the relationships between the numerical and experimental parameters. The experimental results show that the failure stress of landslide deposits is decreased with increasing content of fine particles and also with increased water content, especially at the initial increasing stage. Cohesion of the saturated landslide deposits is increased, but the friction angle is decreased with the increase in the fine particle content. Shear strength parameters (the cohesion and friction angle) are decreased with the increasing water content at the initial increasing stage, and then, they slowly decrease. There is a critical value of the water content at 5%‐7% (in weight) for the failure stress and shear strength parameters of the landslide deposits. Quadratic equations are presented to describe the relation between the bond force and cohesion, and the numerical friction coefficient and the experimental friction angle.Keywords
This publication has 32 references indexed in Scilit:
- Dynamic process analysis for the formation of Yangjiagou landslide-dammed lake triggered by the Wenchuan earthquake, ChinaLandslides, 2013
- Assessment of geotechnical variability of Songdo silty clayEngineering Geology, 2012
- Study on the shear strength of soil–rock mixture by large scale direct shear testInternational Journal of Rock Mechanics and Mining Sciences, 2011
- Analysis of the geo-hazards triggered by the 12 May 2008 Wenchuan Earthquake, ChinaBulletin of Engineering Geology and the Environment, 2009
- Influence of normal stress and grain shape on granular friction: Results of discrete element simulationsJournal of Geophysical Research, 2004
- Mechanical behavior of compacted composite claysCanadian Geotechnical Journal, 2004
- Relict mountain slope deposits of northern Portugal: facies, sedimentogenesis and environmental implicationsJournal of Quaternary Science, 2003
- Coarse-grained debris-flow deposits in the Miocene fan deltas, SE Korea: a scaling analysisSedimentary Geology, 2000
- Numerical simulations of granular shear zones using the distinct element method: 2. Effects of particle size distribution and interparticle friction on mechanical behaviorJournal of Geophysical Research, 1999
- A discrete numerical model for granular assembliesGéotechnique, 1979