Theoretical and experimental study of layered SAW magnetic sensor
- 1 September 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 104 (10510117) , 874-877
Abstract
In this paper we implement full model using Comsol Multiphysics software, leading to study both SAW structures, resonator and delay line. A general finite element method (FEM) of two-dimensional piezo-magnetic devices is used. In magnetostrictive thin film, a coupling between AC/DC module and structural mechanics module was implemented by adding appropriate terms to the subdomain variables for strain and magnetic field. The methodology was first validated using SAW resonator based on Quartz substrate and Nickel IDT. Variation of resonance frequency, quality factor and electromechanical coupling coefficient were investigated versus magnetic field intensity and direction and compared with published experimental results. The model was then considered to study original structures and predict their behaviors and sensitivities to magnetic fields. Thus both SAW structures Ni/ZnO/IDT/LN-Y128 and Ni/Al2O3/IDT/LN-Y128 were investigated. The first one simulated and realized experimentally shows a moderate sensitivity 0.65 ppm/mT when the fundamental SAW is considered (159 MHz) and 2.1 ppm/mT when considering the third pseudo-harmonic (460 MHz). For the second structure, the sensitivity was enhanced by a factor 9 using comparable operating frequency while a sensitivity of 31.5 ppm/mT is obtained when considering device operating at 815 MHz.Keywords
This publication has 12 references indexed in Scilit:
- Multilayer magnetostrictive structure based surface acoustic wave devicesApplied Physics Letters, 2014
- Sensitivity of Surface Acoustic Wave Magnetic Sensors Composed of Various Ni Electrode StructuresJapanese Journal of Applied Physics, 2012
- Elastically Driven Ferromagnetic Resonance in Nickel Thin FilmsPhysical Review Letters, 2011
- Surface acoustic wave sensors in the bioanalytical field: Recent trends and challengesAnalytica Chimica Acta, 2007
- Wirelessly interrogable SAW-sensors for vehicular applications2002
- Monitoring the tire pressure at cars using passive SAW sensors2002
- The potential of microacoustic SAW- and BAW-based sensors for automotive applications - a reviewIEEE Sensors Journal, 2002
- Wirelessly interrogable magnetic field sensor utilizing giant magneto-impedance effect and surface acoustic wave devicesIEEE Transactions on Instrumentation and Measurement, 2000
- A review of wireless SAW sensorsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2000
- Passive radio requestable SAW water content sensor1999