Steady state thermomechanical modelling of friction stir welding
Authors:
- A. BastierABA. Bastier
- M. H. MaitournamMMM. H. Maitournam
- K. Dang VanKVK. Dang Van
- F. RogerFRF. Roger
- 1 May 2006
- journal article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 11 (3) , 278-288
Abstract
This paper presents a computational method for the simulation of a welding process called friction stir welding. This simulation is divided into two main steps. The first one uses an Eulerian description of the thermomechanical problem; a 3D mixed finite element model based on a computational fluid dynamics package is used to establish the material flow, the temperature and the pressure fields during the process. These results are compared with experimental data. The second step of the simulation is more original. A part of the initial geometry is extracted in order to evaluate the material flow in a local domain around the tool. A steady state algorithm is then used to calculate the residual state induced by the process. This calculation takes into account the whole mechanical history of the material because the algorithm is based on an integration along the trajectories of the particles. Finally, the residual stresses of a friction stir welded assembling are evaluated. It should be noted that only the steady state phase of the process is simulated, which leads to a substantial reduction of computational time.Keywords
This publication has 11 references indexed in Scilit:
- A local model for the thermomechanical conditions in friction stir weldingModelling and Simulation in Materials Science and Engineering, 2004
- Development of Trivex friction stir welding tool Part 1 – two-dimensional flow modelling and experimental validationScience and Technology of Welding and Joining, 2004
- An analytical model for the heat generation in friction stir weldingModelling and Simulation in Materials Science and Engineering, 2003
- Two-dimensional friction stir welding process model based on fluid mechanicsScience and Technology of Welding and Joining, 2003
- Prediction of temperature distribution and thermal history during friction stir welding: input torque based modelScience and Technology of Welding and Joining, 2003
- Thermal modeling of friction stir welding in a moving coordinate system and its validationInternational Journal of Machine Tools and Manufacture, 2003
- Three-dimensional modeling of the friction stir-welding processInternational Journal of Machine Tools and Manufacture, 2002
- Properties of friction-stir-welded 7075 T651 aluminumMetallurgical and Materials Transactions A, 1998
- Constitutive equations for use in prediction of flow stress during extrusion of aluminium alloysMaterials Science and Technology, 1997
- Determination of flow stress: Part 1 constitutive equation for aluminium alloys at elevated temperaturesMetals Technology, 1979