Modelling the adsorption of mercury onto natural and aluminium pillared clays
- 25 April 2012
- journal article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 20 (1) , 469-479
Abstract
The removal of heavy metals by natural adsorbent has become one of the most attractive solutions for environmental remediation. Natural clay collected from the Late Cretaceous Aleg formation, Tunisia was used as a natural adsorbent for the removal of Hg(II) in aqueous system. Physicochemical characterization of the adsorbent was carried out with the aid of various techniques, including chemical analysis, X-ray diffraction, Fourier transform infrared and scanning electron micrograph. Batch sorption technique was selected as an appropriate technique in the current study. Method parameters, including pH, temperature, initial metal concentration and contact time, were varied in order to quantitatively evaluate their effects on Hg(II) adsorption onto the original and pillared clay samples. Adsorption kinetic was studied by fitting the experimental results to the pseudo-first-order and pseudo-second-order kinetic models. The adsorption data were also simulated with Langmuir, Freundlich and Temkin isotherms. Results showed that the natural clay samples are mainly composed of silica, alumina, iron, calcium and magnesium oxides. The sorbents are mainly mesoporous materials with specific surface area of 2 g−1. From the adsorption of Hg(II) studies, experimental data demonstrated a high degree of fitness to the pseudo-second-order kinetics with an equilibration time of 240 min. The equilibrium data showed the best model fit to Langmuir model with the maximum adsorption capacities of 9.70 and 49.75 mg g−1 for the original and aluminium pillared clays, respectively. The maximum adsorption of Hg(II) on the aluminium pillared clay was observed to occur at pH 3.2. The calculated thermodynamic parameters (∆G°, ∆H° and ∆S°) showed an exothermic adsorption process. The entropy values varied between 60.77 and 117.59 J mol−1 K−1, and those of enthalpy ranged from 16.31 to 30.77 kJ mol−1. The equilibrium parameter (R L) indicated that the adsorption of Hg(II) on Tunisian smectitic clays was favourable under the experimental conditions of this study. The clay of the Aleg formation, Tunisia was found to be an efficient adsorbent for Hg(II) removal in aqueous systems.Keywords
This publication has 53 references indexed in Scilit:
- Mineralogical identification, spectroscopic characterization, and potential environmental use of natural clay materials on chromate removal from aqueous solutionsChemical Engineering Journal, 2011
- Selective precipitation of Cu from Zn in a pS controlled continuously stirred tank reactorJournal of Hazardous Materials, 2009
- Adsorption of toxic mercury(II) by an extracellular biopolymer poly(γ-glutamic acid)Bioresource Technology, 2009
- Kinetics, isotherm and thermodynamic studies of adsorption of Acid Blue 193 from aqueous solutions onto natural sepioliteColloids and Surfaces A: Physicochemical and Engineering Aspects, 2006
- Removal and recovery of Cr(VI) from wastewater by maghemite nanoparticlesWater Research, 2005
- Removal of inorganic mercury from aqueous solutions by biomass of the marine macroalga Cystoseira baccataWater Research, 2005
- Potential of Rice Husk and Rice Husk Ash for Phenol Removal in Aqueous SystemsAmerican Journal of Applied Sciences, 2004
- Kinetics of mercury adsorption from wastewater using activated carbon derived from fertilizer wasteColloids and Surfaces A: Physicochemical and Engineering Aspects, 2001
- Design parameters for fixed bed reactors of activated carbon developed from fertilizer waste for the removal of some heavy metal ionsWaste Management, 1998
- Reduction of Hexavalent Chromium by Amorphous Iron SulfideEnvironmental Science & Technology, 1997