Using gradient boosting regressor to predict stress intensity factor of a crack propagating in small bore piping
Authors:
- 1 December 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1331-1336
Abstract
Estimating the value of the stress intensity factor (SIF) for a crack propagating in small bore piping is essential for predicting the remnant fatigue life (RFL) of the aforementioned asset. Currently, the finite element method (FEM) is utilized to predict the SIF. The main shortcomings of SIF prediction using the FEM are high computational cost and considerable time-consumption. In this manuscript, the authors propose using gradient boosting regressor (GBR) as an alternative to FEM for predicting the SIF of a propagating crack. The GBR is firstly trained and then validated by using 70 and 30 SIF values, respectively, obtained by FEM. During the validation process, the coefficient of correlation (R2) between the SIF values obtained by FEM and by GBR is 0.977, indicating good agreement between the two. The time required to predict the SIF of 30 data points is reduced from 30 mins (for FEM) to one second with the help of the proposed GBR. Good prediction accuracy and less time-consumption of GBR make it a suitable alternative to FEM for SIF prediction.Keywords
This publication has 6 references indexed in Scilit:
- Comparison of Various Surrogate Models to Predict Stress Intensity Factor of a Crack Propagating in Offshore PipingJournal of Offshore Mechanics and Arctic Engineering, 2017
- Adaptive Gaussian process regression as an alternative to FEM for prediction of stress intensity factor to assess fatigue degradation in offshore pipelineInternational Journal of Pressure Vessels and Piping, 2017
- Minimizing hydrocarbon release from offshore piping by performing probabilistic fatigue life assessmentProcess Safety and Environmental Protection, 2017
- Handling Uncertainty in the Remnant Fatigue Life Assessment of Offshore Process Pipework2016
- Use of AHP for risk based fatigue degradation inspection analysis of topside piping on offshore production and process facilities2015
- Simple methods of determining stress intensity factorsEngineering Fracture Mechanics, 1981