The Influence of Multiple Axial Erosions on the Fatigue Life of Autofrettaged Pressurized Cylinders
Authors:
- 5 February 2001
- journal article
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 123 (3) , 293-297
Abstract
Erosion geometry effects on the mode I stress intensity factor (SIF) for a crack emanating from an erosion’s deepest point in a multiply eroded, autofrettaged, pressurized, thick-walled cylinder are investigated. The problem is simulated as a two-dimensional problem and is solved via the finite element method. Autofrettage, based on von Mises yield criterion, is simulated by thermal loading and SIFs are determined by the nodal displacement method. SIFs are evaluated for a variety of relative crack lengths, a0/t=0.01-0.45 emanating from the tip of erosions of different geometries, namely, (a) semi-circular erosions of relative depths of 1–10 percent of the cylinder’s wall thickness, t; (b) arc erosions for several dimensionless radii of curvature, r′/t=0.05-0.4; and (c) semi-elliptical erosions with ellipticities of d/h=0.5-1.5, and erosion span angle, α, from 6 deg to 360 deg. The effective SIF for relatively short cracks is found to be increased by the presence of the erosion, which in turn may result in a significant decrease in the vessel’s fatigue life of up to an order of magnitude. Deep cracks are found to be almost unaffected by the erosion.Keywords
This publication has 10 references indexed in Scilit:
- Three-Dimensional Analysis of a Semi-Elliptical Crack Emanating From an Erosion at the Bore of an Autofrettaged Pressurized CylinderJournal of Pressure Vessel Technology, 1999
- Cracks Emanating From an Erosion in a Pressurized Autofrettaged Thick-Walled Cylinder—Part II: Erosion Depth and Ellipticity EffectsJournal of Pressure Vessel Technology, 1998
- Cracks Emanating From an Erosion in a Pressurized Autofrettaged Thick-Walled Cylinder—Part I: Semi-Circular and Arc ErosionsJournal of Pressure Vessel Technology, 1998
- Fatigue Life Analyses and Tests for Thick-Wall Cylinders Including Effects of Overstrain and Axial GroovesJournal of Pressure Vessel Technology, 1995
- Axial cracks in pressurised eroded autofrettaged thick cylindersInternational Journal of Fracture, 1993
- Fatigue Lifetimes for Pressurized, Eroded, Cracked, Autofrettaged Thick Cylinders1993
- Stress Intensity Factors for a Radially Multicracked Partially Autofrettaged Pressurized Thick-Walled CylinderJournal of Pressure Vessel Technology, 1988
- A virtual crack-closure technique for calculating stress intensity factors for cracked three dimensional bodiesInternational Journal of Fracture, 1988
- The Temperature Field for Simulating Partial Autofrettage in an Elasto-Plastic Thick-Walled CylinderJournal of Pressure Vessel Technology, 1988
- Simulation of Partial Autofrettage by Thermal LoadsJournal of Pressure Vessel Technology, 1980