Rotor temperature estimation of squirrel cage induction motors by means of a combined scheme of parameter estimation and a thermal equivalent model
Authors:
- F. PirkerFPF. Pirker
- G. PascoliGPG. Pascoli
- H. OberguggenbergerHOH. Oberguggenberger
- C.J.M. FenzCFC.J.M. Fenz
- 27 August 2003
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 931-937
Abstract
This paper deals with a rotor temperature estimation scheme for fan-cooled, mains-fed squirrel cage induction motors. The proposed technique combines a rotor resistance estimation method with a thermal equivalent circuit. Usually, rotor resistance estimation works quite well under rated load conditions. By contrast, if the motor is slightly loaded, rotor resistance estimation becomes inaccurate due to the small slip. Therefore, rotor temperature estimation under low load conditions may be estimate by a thermal equivalent model. In order to determine the rotor resistance and thus rotor temperature accurately, several machine parameters have to be obtained in advance. Load tests provide the leakage reactance and the iron losses of the induction machine. The stator resistance has to be measured separately. The parameters of the thermal equivalent model are a thermal resistance and a thermal capacitance. These parameters are derived from a heating test, where the reference temperature is provided from the parameter model in the time domain. This lumped thermal parameter model is based on the assumption that the total rotor temperature increase is caused by the total sum of the losses in the induction machine. Measuring results of a 1.5 kW and a 18.5 kW four pole, low voltage motor and a 210 kW, four pole high voltage motor are presented and compared.Keywords
This publication has 6 references indexed in Scilit:
- Measurement of physical signals in rotating part of electrical machine by means of optical fibre transmission2002
- A thermal monitoring and parameter tuning scheme for induction machines2002
- Instrumentation, testing and analysis of electric machine rotor steady-state heating2002
- Realisation of tests to determine theparameters of the thermal model of an induction machineIEE Proceedings - Electric Power Applications, 2001
- Empirical thermal model for inverter-driven cage induction machinesIEE Proceedings - Electric Power Applications, 1994
- Lumped parameter thermal model for electrical machines of TEFC designIEE Proceedings B Electric Power Applications, 1991